20 Most Recent Hitachi DV18DMR 18 volt Hammer Drill Questions & Answers

This guide should assist you in the removal. It is a very standardized system so you should have no issue. http://www.ereplacementparts.com/article/890/How_to_Remove_a_Drill_Chuck.html

I was all over the Hitachi site and this tool doesn't come up but you can call 1-800-706-7337 to get a breakdown and a price the part you need. Let me know if you need more help

Your charger has failed.

https://www.manualslib.com/products/Hitachi-Uc-18yksl-3659810.html

The OEM chuck for that is about 45 dollars. There are no substitutes offered.

Brand New Cordless Drill Battery for Hitachi DV18DCL

• Type: Ni-MH
• Volt: 18V
• Capacity: 3000mAh
• Color: Black
• Weight: 983g
• Dimension: 124.80 x76.90 x106.50mm

http://www.drill-battery.net.au/buybatteries.php/hitachi_DV18DCL_power+tool+battery.html http://www.drill-battery.net.au/buybatteries.php/hitachi_DV18DCL_power+tool+battery.html

If its not an bad soldering or an passive component , beware almost all brands wenn ordering an electric part for a charger its almost always more expensive then a complete (new charger ) the latest years there are more and more remplacement options to the customer , if there are defect components that are not made for ordering on marketing technical reasons and safety and more reasons. mosnfets (passive component almost sometimes fuse resistors but smd components to repair is not meaningfull . when termical defects are hidden.

The battery is defective.

http://www.hitachi-koki.com/manual_view_export/pdf/C99187413_DV14DCL2_205.pdf

Generally the answer is yes for most models. Check the manual.

control of the electric field wires and the 2 carbon brushes and the switch https://www.kruis.nl/onderdelen/viewer/?m=hitachi&t=DH24PC3_0&p=dh24pc3

Leave the part that is stuck in a jar with petrol overnight and then put it in a vice and try then to open then with spanner at the end of the chuck hope this helps

How to Remove Drill Chuck If there is screw in inside center of chuck remove it, it is probably left hand threads so pretend you are tightening it and it will come free. open chuck fully and insert chuck key into holes and hit it with a hammer to remove it.

Replacement HITACHI DV 18DGL battery pack 100% compatible with the original DV 18DGL battery, high quality, wholesale price. http://www.drillbattery.com.au/buybattery.php/hitachi_DV+18DGL_power+tool+battery.html

I'm hoping you mean a chuck "key" .... there are only 4 different sizes and can be bought in tool stores as universal chuck keys tool 4 in 1 tool...

You need to replace the drill chuck.

try this link... How do release the bit from my Hitachi cordless drill Google Search

faltering on a slide contact on electric field or switch, but in most cases dirth (dust) in carbonbrushes can be hanging somewhat in one or both brushholders. Or a problem in the trigger switch itself dust and dirth have almost the highest priority in case of faltering by clamping carbon brushes.