20 Most Recent Gold Medal 2086 Popcorn Maker Questions & Answers

popcorn joe,

yes,thats the best way to add flavor to ur popcorn..
u can taste the flavor better and enjoi it better..


:)
hop i did help..

Check that the wall outlet is good by plugging something else into it. Plug the pop corn device into the outlet. Bend the power cord at both ends to see if the unit lights up. If not, you may have a bad connection inside or a bad switch. There also may be a blown fuse inside you could replace.

I'm not sure if this will be helpful or not...  
The 2086 in the picture looks like the Ultra P-60 with the copper finish (Part #1866 at http://www.gmpopcorn.com)
You can get some manuals & schematics at the Jarco website:  http://www.concessionstands.com/s.nl/it.A/id.307/.f  (The machine is listed there under part #2086, by the way; is this where it came from?)

Anyway, hope this info is of some use.
B. Bryan Buda, Tx

"I have a new boiler requiredthe boiler is drilled" translated from DutchContact Gold Medal, they will have a dealer in your country. Ask for the International department. www.gmpopcorn.com

I hate to put this as a solution because it really isn't. I have an old popper needing a new kettle and was told it was almost as much to purchase a new kettle than the whole machine. The kettle is almost the entire cost of the unit. I will be purchasing a new unit.

That depends on which part you are cleaning. If you are trying to clean the heating element of the machine, do not attempt to use excessive force to remove the grim. It is normal to have a little brown coating on the heating element in popcorn machines.
However if you really desire, you should look for a stove or grill cleaner. They are usually a white fluid that you leave on, then scrub and remove. After that wash it with soap and water to remove the cleaner itself before using.

I actually just had a pleasant experience contacting Hellman Group, (The manufacturer of Nostalgia Electric popcorn machines). I called the main number, pressed 1 for customer support, and after 3 tries (got an answering machine the first couple of times), I got someone in customer service who was able to help me get the part I wanted. Not sure if they can give you a wiring diagram.
The Helman Group, Ltd.
1621 Beacon Place
Oxnard, CA 93033

• tel: 805.487.7772
• fax: 805.487.9975
• [email protected]

for parts, web search - gold medal p60 parts diagram

The cause is a loose wire nut which creates arcing. This is a very common problem and the cause of many fires -- it's a result of low quality work.

When the fuse blows see what else in the house is out, maybe you have the circuit overloaded. Try putting the popcorn maker on a different unused curcuit to see if it still blows. Then you will know if it is the popcorn maker.

What size kettle?
It is probably the thermostat

Unlikely to be the plug adapter. That would just trip the breaker. Your issue is likely to be leaking voltage from the motor windings. I had this with a 1950s desk fan.

Go to http://www.PopcornBulbs.com

You are probably concerned about the recent Salmonella issue? The product is the UNBLEACHED all purpose flour: Gold Medal Unbleached All Purpose 5LB Flour Package UPC: 000-16000-19610-0 Recalled Better if Used by Date: 20APR2020KC The "use by date" is ink dot printed on each package, usually toward the bottom of the package somewhere.

Look on the Argos GB wesite.

wrong site fixya doesnt sell products