20 Most Recent Canon PIXMA MX850 Multifunction Printer - Page 4 Questions & Answers

Hi there!
If you're getting the error code B200 when you try to print on your Canon PIXMA MX850, there is nothing you can do except to have it repaired. This error code indicates a Voltage High Error of the Canon printer. If the printer is still under warranty, please contact Canon for further assistance.

Canon PIXMA... | Answered on Dec 17, 2012

Trake alook at this vid:http://www.youtube.com/watch?v=RoiBaXVhS7g

Canon PIXMA... | Answered on Nov 15, 2012

look for a fuse holder near with power cord socket.

Canon PIXMA... | Answered on Oct 09, 2012

Somewhere on the machine there is a lever that locks the scanner assembly in place for when it's transported. You need to look around all sides or under the top (when you raise it) you might find it along side of the glass.

Good luck!

Canon PIXMA... | Answered on Sep 22, 2012

One way is to hold the 'Stop/Reset' button for at least 5 seconds until the display shows a new message about ignoring the current ink condition. This does not reset the chip but it does allow you to continue printing with the refilled ink tanks.

Canon PIXMA... | Answered on Sep 15, 2012

I think your Black Cartridge is Empty. Check it and replace it with the new one.

Your Printer is trying to produce Black Colour from your Colour Cartridge with a mix of Cyan, Magenta and Yellow.

Canon PIXMA... | Answered on Sep 01, 2012

Just bought new MX318 one chamber gets finished after a few pages. No indicator for finished ink. One compartment of Ink cartridge looks empty the other still full. Tried cleening process but no improvement. Replaced Cartridge but it seems to behave the same as the first after a few prints.

Canon PIXMA... | Answered on Sep 01, 2012

remove protective film from cartridge head? take cartridge back to supplier and exchange it. faulty cartridge always possible.

Canon PIXMA... | Answered on Mar 24, 2012

Best thing I have found to remove ink from hand is rubbing alcohol. Follow up with some hand lotion, since the alcohol will dry your hands out.

Canon PIXMA... | Answered on Feb 22, 2012

I had the same problem after a paper jam. I removed all the paper and still had a same error. I read around the internet and ran into other Canon printers with similar problems. The error is caused by the print clean mechanism getting stuck. The suggested solution for other Canon printers also worked allowing me to fix my printer. First thing I did was turn off my printer. Second is to open the top cover allowing me access to the print cartridge area. With the power off, you can pull the printer cartridge carridge from the right of the printer to the left. Once you do that, look into the area in the right where the print carridge was and you will see two sponges in the bottom of the printer. Behind them to the left is a little mechanism that moves over the to clean them, I gently gave it a pull and it moved a little forward. I closed the printer and turned it back on. Error went away and it's working fine again.

Hope this helps!

Canon PIXMA... | Answered on Feb 17, 2012

Not finding what you are looking for?
Canon PIXMA MX850 Multifunction Printer Logo

409 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2237 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • PIXMA Canon

Most Popular Question

wireless printing not work

  • Office Equipment & Supplies