20 Most Recent
Canonical Ltd. Ubuntu - Page 9 Questions & Answers
I bought a secondhand computer with Ubuntu
Format ur computer using UBUNTU and do clean install.
The existing data will be lost.
As it is a second hand computer, u dont need the existing data.
Got UBUNTU Desktop edition?
If not try to download it from official UBUNTU site.
I can't get my microphone
If your thinkpad has a built in (onboard) mic you may need to disable it. Go to the startup settings and disable any onboard mic. You can always enable it if that's not the problem.
Can't surf web or download in lucid lynx
You have to make a setting of the network through a terminal and it will work fine after this is being done properly. This is happens due to unconfigured setting in the network adapters. You can also directly make setting with the nework adapters settings. Select the proper modem and connections.
How can get back
Duplicate question to: http://www.fixya.com/PostAnswer.aspx?thid=3863577&prdid=926113&ref=unsl
I just installed ubuntu LTS 10.04 over windows,
here are a cupel of links that should help you they are very explainitory guides to using ubuntu.
http://ubuntumanual.org/
http://ubuntuguide.org/wiki/Ubuntu:Lucid
http://ubuntu-manual.org/
I hope this helped.
Thank you,
Norse
Ubuntu update manager error w failed to fetch 404 not found
Hi
When running ubuntu update manager if you get an error saying w failed to fetch 404 not found. In most cases you need to look into your DSN settings to fix this problem. Your DSN under your network setting are wrong. You can double check the setting on your Router or with your ISP's website
Ubuntu 10.04 networking stopped after running updates
I had problems with Ubuntu 10.04 after running updates, After a lot of playing about and hunting around on the net I found the best way of fixing this is as follows:
click on applications, a accessories, then select terminal
now type sudo apt-get remove network-manager
now type
sudo gedit /etc/network/interfaces
you will now be able to edit the file
add the following 4 lines
auto eth0
iface eth0 inet dhcp
auto wlan0
iface wlan0 inet dhcp
now save the file and reboot your system.
You will now find your wireless and lan works
Hello everyone,
could anyone deliver me
http://www.freesoftwaremagazine.com/articles/drivers_linux
Hi try this site and download the pdf it might give you an insite on how to go about it, if you have good knowledge of 'c' programing then you should be able to do it using this tutorial and a bit of your own inititive.
I currently use ubuntu as my file-server using samba share and accesing it via ssh, i've written a few scripts, but as yet havent had to write any drivers. I will be doing it soon for my own pleasure, so i hope this pdf gives a good insight on how to acheive it. post me backyou find this useful
How do i install ubuntu on raid 0?
Hi
Theres a good guide for setting up software raid 0 on the following link
https://help.ubuntu.com/community/Installation/SoftwareRAID
There is a more general guide with really clear steps on the following link
http://beginlinux.com/server_training/server-managment-topics/999-raid-0-on-ubuntu-804
Setting up raid 0 on ubuntu 8.10
Hi
Theres a guide to set up software raid for 9.10 on https://help.ubuntu.com/community/Installation/SoftwareRAID.
Let me know if this helps or if you need hardware / fake raid info. If you do have any questions please let me know
Regards
David
Hello, i would need help setting up a fake raid 0
HI
I have found the best guild to set up Fake raid under ubuntu is https://help.ubuntu.com/community/FakeRaidHowto
If you do have any problems please let me know and I will be happy to help you out
Not finding what you are looking for?
