20 Most Recent
Palit Microsystems GeForce 9600 GT, PCI Express Video Card Questions & Answers
Twin dvi geforce 9600 gt 1gb - need installation instructions
ok well the soundcard is seperate - you can install it if you want but that would cut out room in the case as you have twin graphics cards going in... Main power lead to card should be an 8 pin connector - then they connect together using SLI joiner cable (joins the two cards together)
Minimum system power requirement is 400W Get your drivers from here http://www.geforce.com/drivers Hope this helps
5/6/2017 1:33:42 AM •
Palit...
•
Answered
on May 06, 2017
BSoD when i play a game
this is the thing
try to reinstall all the drivers
plug the jacks properly
is the problem resists u better go with xp or reinstall wiht win 7
5/20/2010 8:11:49 AM •
Palit...
•
Answered
on May 20, 2010
Blue screen of death.
You might try setting the display adapter in the bios to PCI-X,
You could also try going into safe mode to see if you can install the new drivers and fix the problem.
Other than that you would need to stick the card in another computer and confirm whether it is functional.
I have the exact same card with Vista and had no issues, and have been very happy with it.
5/12/2010 5:07:14 AM •
Palit...
•
Answered
on May 12, 2010
My nvidia is always stop while i playing games and
which nVidia do you have? if it's an older model you should replace it, but if you have nVidia greater than 8800 GT you should take to service, probably some wire has disconected or something like that. they will fix it.
i would give directions how to fix it, but you can't do it over the computer, you have to open your chassis and then repair hardware- now that's realy difficult!
4/12/2010 7:05:37 PM •
Palit...
•
Answered
on Apr 12, 2010
Driver don't work with Palit 9600 GT 1GB
this can be an cooling issue with 2 graphics cards in your system or it could be caused by your SMPS, it should be 700w or above to handle such a system efficiently.
8/3/2009 2:58:19 PM •
Palit...
•
Answered
on Aug 03, 2009
Palit 9600 1gb ddr2
pls see that yur cpu or gpu is not heating. the power supply may be the culprit. if u have less than 450 watt psu u may consider upgrading to a 600 wall psu.
3/7/2009 12:39:05 PM •
Palit...
•
Answered
on Mar 07, 2009
Pc getting restared
Check your fans and heatsinks inside the PC for dust and fur. Also, check the capacitors for bulging at the top, as this can also become a problem after a while.
If it's dusty, clean it. If you have any bulging capacitors:
Then it's time for a new motherboard :(
3/5/2009 5:38:14 AM •
Palit...
•
Answered
on Mar 05, 2009
Having problem with my palit 9600 1 gb ddr2
try to uninstall and reinstall again the video driver then try it again. If it has a virus then scan your computer using the antivirus program.
thank for using fixya
CHARCOIS
3/5/2009 5:08:30 AM •
Palit...
•
Answered
on Mar 05, 2009
HI I have a 9500GT
How are you connecting it to the tv? Also what is the brand and model of your television? Do you have a possiblity to connect with a DVI cable and then use 3.5mm -> stereo connectors for sound. (http://www.cablesdirect.com/prodimages/CC399-25_LR.jpg)
10/15/2009 8:49:32 PM •
Palit...
•
Answered
on Oct 15, 2009
I have a crane 181 with a nayax reader. It's only flagging 11 MDB codes. Any answer as to why? Firmware has been up
Without more information, it's challenging to determine the exact reason why your crane 181 with a Nayax reader is only flagging 11 MDB codes. However, here are a few potential reasons why you may be experiencing this issue:
- Compatibility: Not all vending machines and readers are compatible with each other. Make sure that your Nayax reader is compatible with the Crane 181 vending machine.
- Reader configuration: Check the configuration settings of your Nayax reader to ensure that it is set up correctly for the Crane 181 vending machine.
- Communication issues: Check the communication between the Nayax reader and the vending machine. If the communication is interrupted, it may not flag all the MDB codes.
- Faulty Reader: Your Nayax reader may be faulty or damaged. In this case, you may need to replace the reader or have it repaired.
- Firmware: Even if your firmware has been updated, there may still be compatibility issues between the Nayax reader and the Crane 181 vending machine. Double-check the compatibility of your firmware with both devices.
It's best to contact the manufacturer of your Crane 181 vending machine and Nayax reader to get specific support for your issue.
Not finding what you are looking for?