20 Most Recent Toshiba REGZA 52RV530U LCD TV - Page 5 Questions & Answers


Some people recommend trying to update the firmware via USB. Instructions here, http://hubpages.com/technology/How-to-Update-Toshiba-TV-Firmware.

If it is a model 32C120U, there is a known manufacturers defect. This issue is cause by defective main board because the main processor is not well solder to the PCB or the e-prom memory lost the software data. Some time you can try replace the eprom memory on the main board (cost of the e-prom $15) or re-solder with a hot air gun the processor but 90% of the cases you have to change the main board, the cost is around $30 you can find it in www.myshoptvs.com these guy are super. To replace the main board is easy and takes not more than 25 minutes.

This could be your board here, http://www.myshoptvs.com/marketplace/4169-toshiba-32c120u2-main-unit-461c4q51l11-431c4q51l11-vtv-l40613-m6662.html

Toshiba REGZA... | Answered on Mar 19, 2016


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience.
If blinks continue without any pause, the main board is faulty.

Toshiba REGZA... | Answered on Mar 10, 2016


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Toshiba REGZA... | Answered on Aug 27, 2015


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Toshiba REGZA... | Answered on Aug 13, 2015


-Let it play and just listen.

Good luck and enjoy


Mai

Toshiba REGZA... | Answered on Aug 05, 2015


contact foxtel as you will need a service provide approval and then they will talk you through the process.
foxtel is a pay provider and not free to air.

Toshiba REGZA... | Answered on Jul 25, 2015


Fault with the main power supply regulator section. Either it will be on a separate board, or on the part of its main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Toshiba REGZA... | Answered on Jul 20, 2015


Make sure the connections etc are all good. make sure the router is operating. You may have to turn off both TV and router and unplug from power supply for 10 or 15 mins. Plug back in and both should reset and connect.

Toshiba REGZA... | Answered on Mar 08, 2015


Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Toshiba REGZA... | Answered on Feb 24, 2015


Corrupted firmware. A firmware update is necessary. Contact any experienced service technician, or the authorized service centre for Toshiba. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Toshiba REGZA... | Answered on Dec 07, 2014


Busted electrolytic capacitor inside. Contact any service technician. Never switch ON the TV; until the fault is rectified.
http://electronicshelponline.blogspot.com/

Toshiba REGZA... | Answered on Nov 06, 2014


Fault with main board. Damaged component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Toshiba REGZA... | Answered on Oct 04, 2014


Could be something as simple as requiring a new CCFL tube, or perhaps the inverter has packed in and needs to be replaced.

Both require the set to be opened and so diagnostics done. First thing to do would be replace the lamp. If you're not comfortable working on live electronics then take the set to a repair shop.

Toshiba REGZA... | Answered on Sep 07, 2014


Hi

You can trye this:

Unlock all of the channels on the TV by entering the factory reset code. There are three main reset codes that TV manufacturers set. These are 0711, 6688 and 3308. Try each one until you find the one that works. This will reset the TV to original factory settings. When you do this, you will loose any information that you have stored in the TV, such as favorite channels, automatic timers and the clock. You will have to go through the full initial set up.

Toshiba REGZA... | Answered on Aug 07, 2014


"If you cannot remember your PIN code

While the PIN code entering screen is displayed, press [RECALL] four times within five seconds. The PIN code will be cleared and you can enter a new PIN code."

Or you can trye this:

Step3Unlock all of the channels on the TV by entering the factory reset code. There are three main reset codes that TV manufacturers set. These are 0711, 6688 and 3308. Try each one until you find the one that works. This will reset the TV to original factory settings. When you do this, you will loose any information that you have stored in the TV, such as favorite channels, automatic timers and the clock. You will have to go through the full initial set up.

Toshiba REGZA... | Answered on Aug 07, 2014


Try one of these: 1536 1684 0088 0536 0056 0063 0065 7593 1014 1973 1221 0581 1317 1065 1969

Toshiba REGZA... | Answered on Aug 07, 2014


Call Toshiba @ 1800_618_4444 with the same information you provided here, or use .http://www.toshiba.com/tai/americas/index.jsp

Toshiba REGZA... | Answered on Aug 07, 2014

Not finding what you are looking for?
Toshiba REGZA 52RV530U LCD TV Logo

110 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

REGZA Toshiba

  • REGZA Toshiba

Most Popular Question

not coming

  • Televison & Video
Loading...