Westinghouse 32" Flat Panel LCD HDTV - Answered Questions & Fixed issues


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Westinghouse 32"... | Answered on Mar 03, 2016 | 33 views


Best buy is the only place I know of that has the compact round/round or round/square 110v replacement cords. I got one they were stocked in 2 different places, no one knew what the were or where they were. Look up the stock number on line before you go there and have them search the store. It might take an hour but they'll find it. Good luck.

Westinghouse 32"... | Answered on Sep 16, 2015 | 37 views


Do an auto-tune procedure. Refer its user manual for details. Gopakumar Gopalan Google

25402659-urwvpyge22z3ctssgjh4mq2e-1-0.jpg

Westinghouse 32"... | Answered on Feb 06, 2015 | 149 views


Take off the back of the TV and locate the power supply board. It's the one that connects to the power cord. There will be one or more fuses on it. check continuity on them all because sometimes a bad fuse isn't always obvious.

Westinghouse 32"... | Answered on Oct 29, 2014 | 38 views


The TV is not receiving a video signal. It is probably the cable you are connecting the tv to the source. If you are using an adapter, don't. Buy a proper cable.

Westinghouse 32"... | Answered on Mar 31, 2014 | 153 views


i can barely see the w when i turn on the tv but it go away and nothing a black sceen

Westinghouse 32"... | Answered on Mar 19, 2013 | 72 views


Check the tcons connections ( both flex cables and also the LVDS cable) if that doesnt solve it would suspect the Tcon as being defective. For further assistance please respond to this same post.

Westinghouse 32"... | Answered on Jan 01, 2013 | 165 views


Look at the owner manual and not all sets have a headphone jack built into them.

Westinghouse 32"... | Answered on Dec 05, 2012 | 141 views


Which model TV do you have?

The TVs in the LD-325 line are 14.55 pounds with the stand, but is 13.45 lbs without. If you have the original shipping container and all the accessories, the LD-3255VX weighed 21.83 lbs. The LD-3255AR is 23.2 lbs in the box.

The EW32S3PW with the stand is 15 pounds and 1.5 pounds lighter without the stand.

The older model SK-32H640G is 23.9 pounds with the stand. Removing the stand takes 1.4 lbs off the TV weight. When in the original box with accessories, the TV weighed 27.0 pounds.

There are a number of other models, so please add a comment with the model number and if the stand and accessories are going to be in the same box. I hope this gives you some help.

Cindy Wells

Westinghouse 32"... | Answered on Nov 10, 2012 | 41 views


remove the power cord and plug it again if it works...?

Westinghouse 32"... | Answered on Jun 13, 2012 | 39 views


Hi,

Please let me know the exact model no. of your unit, it will help diagnose where the fault came from.
Also, confirm first the status of the signal from your cable provider, try to hook up the cable wire to another TV to determine if the signal is not the issue here.

Jdvillanueva

Westinghouse 32"... | Answered on Jul 31, 2011 | 54 views


Good day!!!


please try to unplug your TV at least 30 minutes to discharge all stored voltage....

Normally if the TV logo appear and the background is white or sometimes blue the TV is on the standby mode...it only need to reset..

Westinghouse 32"... | Answered on Jul 14, 2011 | 58 views


If you cannot get picture or sound with any video sources, I.E. DVD, XBOX, etc., then it is not the cable problem.
Most failure in TV's are due to bad power supply caused by bad caps, blown components.
So the power supply module will be the first palce to look, right now the standby 5vdc is working but not the 12vdc (for sound) or the 24vdc for the backlights inverter boards. it can also be due to the main board is not sending the PS_ON (Power Supply_ON) signal to the power supply module.
Please read my guide to understand more before DIY repair.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: www.interliquidparts.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Westinghouse 32"... | Answered on Jul 13, 2011 | 81 views


There is some system reset to set the tv back to default settings. Also some boxes are picky and want the tv to be on chanel3 or 4 for the scan.

Westinghouse 32"... | Answered on Jul 01, 2011 | 2,177 views


Hi, Check that the plug has power. Use a light to do this. Also check the TV cord maybe bad.
Check breaker pannel. Make absolute sure that you have power getting to the TV. If all is good you need a repairman. Good luck

Westinghouse 32"... | Answered on Jun 20, 2011 | 269 views


By "sound but the screen on my westinghouse 32 inch flat screen is solid lime green" Do you mean that you have sound but the screen is green? If yes it means that an analog signal is being fed to a digital input. Did you recently change the input cables at the back from one port to another? If not then please describe what are colors of the cabels you are using(Yellow, Red, White or Red Blue Gren etc.,) and what port they are connected to so that I can tell you whether its a problem with the connections or the tv itself.

Westinghouse 32"... | Answered on Jun 22, 2011 | 381 views


No pictures on ALL mode? DVD, DIRECT TV, etc? How about using the component video output or composite video out put of the Direct TV?

http://s807.photobucket.com/albums/yy352/budm/WESTINGHOUSE/

If it is TV problem, then please try this:
First, look at the screen in darkened room to see if you can see any slight glow from the screen, if it does, then the problem can be the T-CON (not getting the 12vdc) or the main logic board not feeding the signals to the T-CON board.
if not, next place to check will be the power supply module, make sure it has 24vdc which is required by the backlight inverter to work, the reason for not having 24vdc can be from bad DC filter caps (leaking/bulging top, high ESR) or short circuits in the inverter board which will cause the 24vdc supply to go into shutdown mode, so you may have to disconnect the power cable that feed the inverter board to see if the 24vdc will work without the inverter board hookup, you will need to apply about 3~4 amp of load to the 24vdc to make sure it can handle that. There are fuses on the backlight inverter boards also. So there is some troubleshooting you will have to do to find out the causes of the problem you are having.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Westinghouse 32"... | Answered on Jun 10, 2011 | 92 views


You can check the speakers if they are ok too then your main board might be bad. You can get parts for this TV at www.interliquidparts.com

Westinghouse 32"... | Answered on Jun 03, 2011 | 65 views


0ne of 3 has failed:
(in order of probability):

1. Backlight inverter
2. Power Supply
3. Backlight

Please seek the expertise of an experienced TV repair technician - as they contain potentially lethal voltages that must be properly discharged before work can begin.

Thanks!&^%

Westinghouse 32"... | Answered on May 27, 2011 | 154 views

Not finding what you are looking for?
Westinghouse 32" Flat Panel LCD HDTV Logo

98 questions posted

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...