20 Most Recent Panasonic DP-8045 Grayscale Copier Questions & Answers


there is an error with the finisher/sorter

Panasonic... | Answered on Apr 01, 2019


1. Paper Jam in Fuser Unit.
2. Paper Exit Sensor 1 or 2 is disconnected.
3. Paper Exit Sensor 1 or 2 is defective.
4. DRV PCB connector is disconnected.
5. DRV PCB is defective.
6. SPC PCB connector is disconnected.
7. SPC PCB is defective.

Panasonic... | Answered on Feb 02, 2019


What i have seen is the big white gear behind the flywheel is broken where the gear mates with the pin on the shaft.

Panasonic... | Answered on Feb 26, 2016


reset code fuser error...press at the same time "original size" + 'function" + "3"
F9 mode, 06 (ram initialize) sub code 04 to reset fuser code

Panasonic... | Answered on Sep 07, 2015


Drivers for that model of panasonic can be found on driverupdate us. Take a look. cheers

Panasonic... | Answered on Dec 27, 2014


Go to Panasonic.NET, Download GDI driver (unless your 8045 has PCL installed) for your version of computer and run install

Panasonic... | Answered on Feb 13, 2014


E5- 42 Total Counter connection
1. Total Counter connector is disconnected.
2. Total Counter is defective.
3. DRV PCB connector is disconnected.
4. DRV PCB is defective.

Testing in Service Mode, under F4:
062 When CN768-5 signal level changes
to 0V from +24V, counter operates for 100ms.

Panasonic... | Answered on Jan 02, 2014


PLEASE CALL 09422259738 FOR SOLUTION

YOU NEED TO FOLLW THE PROCEDURE

Panasonic... | Answered on Jun 28, 2013


Turn the main power switch on the back of the machine off and leave the power switch on the left side on. Make sure no F-rom cards with firmware are in the machine. Press and hold energy saver and function keys down, turn the main power on in the back of the machine continue holding keys for about thirty seconds. The lcd blinks and shows a + on the upper left, press the + sign then one + sign on lower right edge and then one + sign in the middle. If the + sign goes away try the procedure again. Once it is calibrated reboot the machine and touch the Lcd in different spots to see how it works. Hope this helps.

Panasonic... | Answered on Jul 20, 2011

Not finding what you are looking for?
Panasonic DP-8045 Grayscale Copier Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Shannon Murphy

Level 1 Expert

2 Answers

HEMANT GROVER

Level 2 Expert

171 Answers

Are you a Panasonic Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Office Equipment & Supplies

  • Panasonic Office Equipment & Supplies

Most Popular Question

need drivers panasonic

  • Office Equipment & Supplies
Loading...