20 Most Recent Weber Genesis E-310 Gas Grill - Page 6 Questions & Answers

dicking around with parts from the manufacturer is expensive, time consuming and will prove frustrating since even if you get it to work it will fail again in no time. Instead, consider getting yourself one of those extended butane lighters at the grocery store. The ones with flexible lighter shafts work best in most applications.

They're very, very difficult to find, because Weber Grills ARE NOT approved to be converted from one gas type to another.

For more on this, please see the Weber FAQ link below.

http://help.weber.com/faqs.aspx

Click on the Weber link below for customer support and the nearest location that can service your grill. http://support.weber.com/ Weber com Parts Support

Check for a clog in the orifice.

Also in the Manual in Section D9. :>D https://www.appliancefactoryparts.com/content/pdfs/135762-1.pdf ..

question edited for clarity. It will be the opposite of assembly in the manual section B1. https://www.appliancefactoryparts.com/content/pdfs/135762-1.pdf ..

Question edited for clarity and spelling 'oraffice' to orifice. Never drill holes! The size of jets is set to very high tolerances by the factory. The burner tube on this is a P-shape which makes it problematical to clean out the spider nests that live in there in the winter. It is a simple system, the gas shoots from the jet and mixes with air in the entrance to the burner tube and burns through the hole in the top. The only other possibility is that the pressure regulator needs adjusting. You adjust it with the burner set on the lowest position to achieve a flame that is low and stable and doesn't go out. https://www.weber.com/US/en/help/schematics/browse/50060001 ..

Orange flame is not enough air in the gas air mix. You have a spider nest living in the venturi tube and nozzle. Weber sell a special brush. The venturi tube is between the gas control knob and jet and the burner.

Clean the air inlet on the burner jets. Orange flame is just wasted fuel.

Check to see if there is a locking screw that holds the knob on

Possibly no adapter/regulator.

Open Stovetop On most stoves, the air shutter is just behind the burner gas valve. It is a sliding plate or tube that covers the burner air vent. Loosen the set screw that keeps the shutter from moving. Turn the burner on fully and slowly open the shutter until the flame turns blue https://homeguides.sfgate.com/causes-burner-flame-gas-stove-yellow-82498.html

with the control knob

Google the make and model for a parts list , We do not have a price on here

IS this nat gas

Check thermocouple.

It is malfunctioning -- be careful not to let anyone get hurt by a malfunctioning gas grill!

This is why most people buy a new one every few years

Unplug the unit and take it to the dump

Sounds like your propane tank is empty. Go get a refill!