http://www.fixya.com/support/p91354-viking_designer_series_dfud041_built_inSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 03 Dec 2009 17:26:29 GMT80http://www.fixya.com/support/t1603653-viking_designer_series_dfud041_built_inMy two year old was pushing the buttons and now nothing is illuminated and I can't turn the dishwasher on.Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t1592165-cycle_just_continues_pot_symbol_blinkingMy Viking DFUD041 just hums or continues swishing or running with the Pot symbol blinking. Now when I look up the symbol in troubleshooting guide it says a blocked drain. I took the hose off the trap and attached a shop vac to it to see and nothing....Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t259697-test_bosch_heating_elementmodel shu4022uc/06 stops at wash stall and rinse stall in cycle (manual advance cleans dishes). how?to access heating element to test continuity?Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t280157-zanussi_dishwasher_de6850Does not seem to be washing properly and will not dry dishesThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t289007-hotpoint_dishwasher_7830_deluxeA white surface is left on all the items after the wash cycle has finished. Our machine is 19 years old now. However our machine matches the decor so we want to keep it. Anything I can do to get a few more years out of my machine until we replace the...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t308663-ge_built_in_dishwasherthere are several things wrong with my dishwasher right now 1) the soap dispenser dish will not close 2) the dishes are not coming out as clean as I would like 3) the water did not drain from the baseThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t341573-ge_dishwasher_not_draining_waterGE Dishwasher Model GSD6610K01BB is not draining water. Does go through the full wash cycles -- please helpThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t346637-maytag_dishwasher_blinkingMy maytag dishwasher model 665.15974992 lck on light is blinking. When I pulled the kick panel off and foung the repair guide it says it is doing this because one ore more buttons is stuck, but doesn't say how to unstuck them. I have tried pushing...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t348491-broken_door_spring_kitchenaid_dishwasherI have the broken spring, and I know one end attaches to the hinge. Where does the other end attach?Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t371483-hotpoint_dwt10_dishwasher_error_codesHi I have a DWT10 Hotpoint Dishwasher. It has the lights for the eco & fast programs flashing and will not drain. Any advice to what iit could be and how to fix it would be greatly appreciated. ThanksThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t371705-not_using_dishwasher_okI just moved into a condo, and told the landlord that I don't make enough dirty dishes to use the dishwasher. Big mistake. He wants me to run the dishwasher at least once a month to keep the thing from breaking and then having to pay the cost of...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t381377-notmstarting_or_stopping_possibleI have a Maytag Dishwasher model MDB5100AWW It will start to wash but will not cycle through and will not turn off unless I turn it off. I then need to drain it and it will do this but it will not stop trying to drain, thus I need to turn this...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t392033-tv_staticI just installed a new dishwasher. When it is running, it causes static lines on the TV. Prior to the new dish washer, I did not have this problem. It is wired correctley, and not on the same circuit. As I stated I did not have this problem until the...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t392903-indesit_1300_evolution_washing_machinedoes anyone know what fault code f-08 is on the above machineThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t395951-aeg_50760_dishwasher_shows_error_code_30AEG 50760 shows Error Code 30 everytime it starts after about 10 seconds. Cannot clear error code. Have checked machine does not appear to be blocked. The user manual says "leak prevention system activated". Please help.Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t394889-hotpoint_fdw85_dishwasher_error_codecan anyone help me with this error code AL10 on are hotpoint fdw85. i thought it was the salt empty code so filled it with salt it runs for two mins fills with water then pumps it out when error code comes on and just stays on AL10. please help...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t395717-hotpoint_dishwasherI need to change waste pipe on my hotpoint dishwasher. I was given this dishwasher by a friend and it works well but I cant connect the waste pipe to the bit under the sink as the rubber connection on the end is missing. I bought a new waste pipe but...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t404777-water_not_getting_hotHi i have a dishlex dx302 i have power on the active side of the heater however on the nuetral side which is switched by a relay on the control panel the relay is not pulling in to supply nuetral to the heater the relay tests fine but it is not...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t407525-kenmore_dishwashermy dishwasher was having a control borad problem, but we fixed that but the key pushing, but now when i try and run it the motor wont workThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t408113-kenmore_dishwasher_model_665I cant get my rinse aid to dispense.Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t410249-dishwasher_not_cleaningI have a HELLER DWH3 dishwasher and the top washing arm is not spinning around. The detergent is just staying in the place where it goes. The water pressure is awesome and i have taken the whole tray out to see if there is a blockage there but there...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t415193-bosch_dishwasher_permanently_drainingBosch dishwasher is permanently draining even when the door is open. The draining usually does not stop, but on the occasions it does the wash cycle only last a few minutes before it draining again.Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t415259-help_non_functioning_dishwashertHE LIGHT 3RD DOWN SHOWING AN ARROW POITING RIGHT TO A VERTICAL LINE DOWN IS RED AND FLASHING AND NOW WILL NOT LET ME PROGRAMME TO ANY MODE AND MOTOR SOUNDS BUT NOTHING IS HAPPENING Dishwasher start light flashing & also dry light flashing,...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t419237-dishwasher_wont_heat_waterthere is 240v going through the element when on cycle, but wont heat up? any ideas. plsThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t431327-maytag_dishwash_no_lights_will_light_upMy dishwasher will not turn. None of the lights on the control panel are on. How do I test the control panel or other things to determine the problem.Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t432239-ge_quiet_power_3_troubleshootingour dishwasher runs through a cycle but does not clean. the dish soap remains in the capsule. thanksThu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t432605-greasy_bottom_in_dishwasherThere is a greasy residue in the bottom of my dishwasher in the front and right under the door. Have tried x-hot water, use normal wash cycle, tried more detegent, tried less detergent,Washer is level. Now what?Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t433355-cutlery_cloudy_dirtyCutlery is cloudy and dirty, some food is dried onto knives and forks. Cups and glasses are cloudy and not clean on inside. Coffee or tea stains are not removed. Plates and soup bowls seem OK , and water is draining properly. We have tried with less...Thu, 03 Dec 2009 17:26:29 GMThttp://www.fixya.com/support/t435299-frigidaire_dishwasher_dirty_sticks_inmy frigidaire mod # FDB658RAC1 top sprayer arm does not apear to ever get water during any cycles glasses always have dirt on them and machine will stick in one cycle often. Thanks in advance Brady.Thu, 03 Dec 2009 17:26:29 GMT