http://www.fixya.com/support/p906751-fisher_paykel_wl26cw2_top_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 24 Dec 2009 10:44:54 GMT80http://www.fixya.com/support/t2305300-clothing_stuck_under_agitatorAfter washing a load on "delicate" setting I found the top of my pantyhose sticking out from under the agitator. The rest of the hose is lost underneath. Can I remove the agitator somehow?Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t1907757-appears_turned_but_start_running_waterHad washed 2 rugs, machine was beeping but appeared to have completed the entire cycles. Next washed a load of towels - again came back and the machine was beeping, but clearly had not finished the spin cycle. Now next load, machine appears to tuen...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t192086-washing_machine_will_not_drainI've lost my manuel for the washing machine. Fault report showing on the machine is F04? It's a BOSCH 1400 Express Exxcel, can anyone help???Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t188948-washing_machine_problemsI have a Maytag washer model LAT8234AA3. Last night i turned it on and it filled about half way up with water and then it stopped. I turned the switch off and then back on and it wouldn't restart . I tryed every cycle, all the temp. settings, and all...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t190520-hotpoint_wf220_washing_machinewhen i switch power on, all display lights illuminate for a second then go off. Then there seems to be no power to the appliance at all. i then have to switch off at the plug socket, leave for eight seconds and switch on again with the same results. ...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t192365-hotpoint_aquarius1100_electrical_probmy machine has just been moved from one house to another 4th floor flat today,and upon using it it seemed to work fine then it tripped the switch on that circuit ,it then seemed to work fine to just spin if i put it on that part of the cycle.now...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t194153-hoover_600m_washing_machine_cycle_issueOur washing machine won't progress through it's normal cycle. The dial no longer moves or clicks through to the next step in the washing cycle.Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t194612-rubber_cuplingThe rubber cupling that connects the motor to the gear box appears to be the problem...my question is how difficult is that to fix and the best way to dismantle the unit to repair it. Thanks in advance for your advice and help. BrantThu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t194678-kenmore_top_loaderwill drain but wont spin.something black hanging down from motor.look's like a belt .Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t195536-whirlpool_lgr7648kq1_top_loader_washerWasher fills, goes through wash cycle, but won't drian or spin. Timer continues to function normally after wash cycle, but when it gets to the drain cycle a motor hum (similar in sound like a stuck garbage disposal unit) happens for a few seconds...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t195056-hotpoint_wma10_washing_machine_wont_stopthis model of washing machine when starting up will not stop filling up .tried different programmes .it has just started doing it today .have to stopit and spin to drain it. there was that much water today that it started coming through the...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t197570-maytag_neptune_6500_burn_sealLast night, I washed some clothes with two pillows. Looks like the pillows were rubbing against the seal? (the plastic thing next to the door) and now that seal has a hole. It is not big but I don?t want to wash until know if that?s really bad (maybe...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t197645-used_kenmore_stackable_washer_dryer_p_nI bought a used kenmore stackable washer and dryer P/N 145781-000A. I wired an outlet for it in my condo. Since the plug has four prongs I installed a four prong outlet, but there are only three wires coming from the box: two 120v. hot wires and...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t200684-washer_machine_drains_while_fillingI just received a used whirlpool washer maching..I tried to see the model # but it looks like it has been "wiped" off of it... It drains as it is filling. The spin and rinse cycle work. I tried raising the hose to 39" like I read somewhere, but that...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t200789-problem_indesit_we16My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t202424-washing_machine_not_filling_water_notAt the start of washing cycle nothing happens at all.Machine does not fill with water and when you manually advance dial to further into wash mode machine starts to spin.It does not rinse in (rinse /spin) cycle but spins only and of course when dial...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t203420-zanussi_washing_machinehey, ive just moved into a new house and ive got a zanussi washing machine fl881. buy not instructions i need to know what processes the letters mean on the dial as event the details on the front have faded so much there unreadable. please help.Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t204689-washing_machine_not_getting_cold_waterNot getting cold water. I think it might be the cold water solenoid. If this is the problem, how big of a job is it to replace the soleniid and where can get the parts and instructions. Estate TAWB600EQ Washing Machine.Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t204746-washing_machine_problemWashing machine immediately starts draining upon starting. Performs all other functions fine. I've tried moving drain hose around to affect the siphoning. Not sure what to do.Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t205424-whirlpool_duet_sport_washerTWO WEEKS OLD!!!! Stopped it mid cycle, would not re-start. Flashing F-01Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t206537-plastic_sleeveWater is pouring out of the plastic sleeve in the back of my washing machine. I am getting a ob code and a lf code as wellThu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t208622-maytag_top_loader_washerMaytag Washer model LAT9406AAE top loader. installed new seal kit and new baring assembly. No leaking, but tub won't spin, although it does agitate just fine, so it's on the tranny OK. Took it all apart and redid. OK on no leaking, but still won't...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t211460-washing_machine_repairIt won't pump the water out, spin or take the conditioner, which I assume are all related to not having the water removed. The filter pump has also started to make a rumbly noise!!! I would be grateful for any help. ThanksThu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t212405-help_needed_indesit_washing_machineDoor handle won't release door. lock light is off, handle lever moves but doesn't operate lock, lever doesnt return to closed position (broken spring?). How do you open this door in order to replace the mechanism?Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t213323-final_spin_cycle_kenmore_417_40042990My washer will not do the final spin cycle in any mode of wash, regular,perm press,etc. until I move the timer back to the begining of the final spin cycle after the initail cycle is over.The motor and timer have been changed.Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t213488-problem_bosch_washing_machineMy machine (wfl 1662) finishes the wash, but the "finish" light doesnt turn on- which means that the door is locked. so if i want to take out the clothes, i have to disconnect the machine and wait for a few minutes until I can open the door. In...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t213692-water_not_draining_during_cyclehave a whirlpool top loading washing machine and the water does not drain out during the cycle. emptied water in tub manually and then drained remaining water from drain pump in back. also checked all hoses under unit and all are clear and no kinks...Thu, 24 Dec 2009 10:44:54 GMThttp://www.fixya.com/support/t214277-washing_machinelast night my washing machine tripped the electrics and there was a sort of burning smell. now the washing machine wont turn on at all. tried changing the fuse but that hasnt done anything. any ideas what the problem is? thanks :)Thu, 24 Dec 2009 10:44:54 GMT