This is tricky... I'll suggest that you put the hoses back on EXACTLY where you took them off from. If this does not work, save all the parts, a competent technician will be able to reassemble your unit for about twice the cost of buying a new one.
Hi Beverly. I'm sorry you're experiencing difficulty with your ProHeat 2X. You may want to contact us for assistance. Here's a quick link to contact us: http://www.bissell.com/contact-us/?cid=ccsocial
Hi Martha. No spray could be caused by a number of things. I'm sorry you're experiencing difficulty and I understand how frustrating this must be.I want to provide you with a terrific FAQ that will give you a complete list of troubleshooting steps to resolve the no spray.Here's the link: http://www.bissell.com/FAQDetail.aspx?id=1122&cid=ccsocial
Here's a helpful video that really helped me out the first time that I changed a belt on the Bissell Carpet Cleaner. I hope this helps you as much as it helped me.
Feel free to ask any follow up questions by adding a comment to the repair page, I'm always happy to answer any questions that you might have.
If the video helped you, please be so kind and rate the repair helpful by clicking the 4 thumbs up icons in the top right hand corner of the repair. Thanks so much!
Hello, Here is a link for your model. Scroll towards the bottom and you'll see instructions with illustrations for belt replacement and when you scroll down more, you'll see the part numbers for you model. Hope this helps.
Here are some troubleshooting steps you can try:
Check the clean water tank: Ensure that the clean water tank is not empty and is filled with warm tap water and the appropriate Bissell solution. The cap of the clean water tank should be properly closed.
Re-seat the water tank: Remove the clean water tank from the machine and then re-seat it back into the machine.
Check for clogs: There could be clogs in the system that are preventing the water from dispensing.
Check the pump motor: If the above steps don't work, there could be a more technical problem like a malfunctioning pump motor.
If these steps do not resolve the issue, it may be best to contact Bissell customer service or a professional for further assistance.
Bissell Carpet Cleaner Not Dispensing Water [SOLVED] (vacuupedia.net)
No one says the output voltage and amperage, you just buy them for the Bex Bissell unit. They are dual voltage in 110 to 220. If you have the old one, it will be written in tiny writing on the charger, usually white writing on the face and engraved on the inner surface where the pins are. There are a number in the link from Walmart, eBay and Amazon.
https://www.google.com/search?q=bissell+spotlifter+1715+charger+replacement
..
If your Bissell Little Green Machine has no suction at the hose end but good suction underneath the dirty water tank, try these steps: check for clogs in the hose and attachment, ensure the tank and filters are properly seated, test without an attachment, inspect for damaged hoses or seals, clean the machine, and run hot water through the hose. If the issue persists, contact Bissell customer support for assistance or consult your user manual for specific troubleshooting steps.