Top 20 Tag Heuer AquaracerWAF1110.BA0800 watch Questions & Answers

it have the battery to be reolaced.. bring it to watch service center.

Just replaced a women's Aquaracer battery. It's a 364. Get the SR (silver oxide type) as it will last longer.

Links need to be ordered from TAG.They cost about £30.00 per link best contact www.rolexrepairs.co.uk if you send them the watch they will supply and fit with a free estimate first.
Regards

I think it depends upo which model you have but the web site does not discuss this.

Generally, if it says "automatic" then it is spring driven (does it stop if you don't wear if for a few days?).

If it keeps going, when not worn then i is a battery driven type.

You can see the range of models on their web site http://www.tagheuer.com/the-collection/aquaracer/man/leonardo-dicaprio-ltd-edition/index.lbl?w=WAJ2116.FT6022. and you may be able identify yours from their list.

It depends. Maybe your skin is very sensible. May be the material used is't good for you. But mostly the main reason is: crown (you say knob) is too large for the wearer or have too sharp edges. Visit your nearest watch repair shop and explain what the problem is. Watchmaker will find other crown (different in shape and size, but no lesser quality) and will fit to your watch for your comfort. Rate me, plz.

Yes it is correct as your watch has a counterclockwise crown forward setting direction. This is due to the specificaly layered lever and setting gear construction, so, nothing wrong with your watch.
Do not forget to rate, please.

The knob is a screw-cap seal. When closed (screwed in) it closes the chamber to prevent water from entering the watch.

You will need to unscrew it. It should snap out. In this position, you can wind the watch. Pull the knob out one click, and you can adjust the date. Pull the knob another one more click, and you can adjust the time.

Push the knob back in. In order to seal the watch back up, you will need to push the knob in while turning the knob. You will know you did it correctly when the knob will not turn any further.

Good luck.

There are several links that have a pin that can be removed. Removing two adjacent links and replacing the pin without the middle link is that way to do it. I could go on and on, but this site shows you how...

http://www.webjeweller.com/jewellery/removelinks.shtml


Ken

Any jewelry store that sells watches, or even those little watch kiosks at mall should be able to help you with that.

send in for repair to a watchsmith

we wouldnt know

You probably have a screw down crown. Turn the crown counterclockwise and unscrew the crown. Now you should be able to pull it out. When tightening it back down, don't over tighten, just snug. This is to keep moisture out of your watch. Always have it screwed down unless you are setting the watch.

Contact manufacturer they will help. :-)

why not just take to a watch/jewellery store and get battery changed

Tags once were often on the fake market but this watch should be real. A watch repair shop can open the case and tell you quickly. Its about a $1500 watch new.

Thank You for Article :) http://www.khasbox.com/

this game, you start at the cavern men's age, then evolve.The goal of the game also differs depending on the level. In most levels the goal is to reach a finish line or to collect tokens. Many levels feature alternate or nonexistent goals for the player. The game controls are shown just under animaljam 2 ' five nights at freddy's 2' hotmail login

Hi thank you for answers but it doesn't help me given I already have the bezel off. What I actually need is the actual size of the Spring? I know they are available to buy on eBay and watches.com.uk but to not even bother to respond to you inquiries for some reason?

Does anybody know the correct size of the "friction/ ratchet bezel spring" on a Tag Heuer WAC1113.ba0850 model 2004 - 2007 ?

You have selected a wonderful watch... Heuer and TAG/Heuer should be gently wound by the motion of the human wrist and the falling of a centrally pivoting weight (there is no ideal direction). AUTO-WIND function is NOT at all unique to your watch... After a couple of CHEAPER "winders" failed me... and after I figured about 4 watches was more than enough to keep wound... I found the greatest BASIC watch winder... to run year over year (efficiently and quietly) MTE watch winder (their very basic WTS-4). Good luck: I WILL try to include the URL (see page 6) http://mte-watchwinder.com/fileadmin/PDF-Uhrenbeweger/MTE_Watch_Winder_Brochure_Engl.__09-2015.pdf