20 Most Recent DKNY Leather #NY1328 Watch for Men - Page 4 Questions & Answers

i have the same problem.. if you find the repair parts please let me know..

No, we are NOT a store. THis is a community of consumers (like you).
If its just a pin you need, I would find a local watchmaker who should have most pins in stock. If this is not available, then you can try to contact DKNY at the following link, but you will have to be able to be specific with info about your watch (you will need to give them the info on the back of the watch)
Best regards!

If you have a problem with a new watch, return it to the seller. If you attempt any self repairs, you will invalidate the warranty.

http://www.dkny.com/contact/

May I get the make and model # of the watch to help you more

You can do it yourself if you have Ultrasonic Cleaner. If you do not have such a thing, you have to visit your nearest watch repair chop and ask to clean it. Rate me, plz.

Of course, you can. Take your watch to the nearest watch repair shop and the watch maker will replace it.

You can contact DKNY on "Toll Free Number - 1-800-231-0884 ". This is a service or repairs site who may be able to help you.


I trawled through their web site "www.dkny.com" but was unable to find any user instructions download (which are there on many web sites).

There is a store finder on the site and if it is convenient, you might find it better to visit a store, as demonstrations are often better than verbal instructions.

Good luck.

I guess it customize bracelet and so do there pins & screw
company does that so consumers bound to send them to fix
well if you in chicago we can try our best to fix it or take to any expert watch maker who can find substitute
hope this help

from

AmFix Jewelry & Watch Repair
203 N. LaSalle Street,
Chicago, IL 60601
Ph: 312 641 7000
Email: [email protected]
Web: www.goamfix.com

It sounds like your watch is not coming out of set mode. Make sure that when you are done setting the watch that the display is no longer flashing. This is usually done by holding down the mode or reset button.
If this is not the case then have the watch AC'd. As long as there is no problem with the circuit board this should fix the problem.

DKNY is typically a quartz movement and doesn't have a "winder". I believe the part you are referring to is the crown. The watch may have stopped working for several reasons. The first three things I would suspect is that the battery died, the watch is in the set position, or the movement was damaged when the crown was coming off. If the watch is in the set position then pushing the stem in will cause the watch to run. The next thing to do is to replace the battery since it is only a few bucks. If it runs then you can replace the crown and your set. If it doesn't run I would suggest replacing the movement along with the crown and that you will have to price and see if it is within reason since this type of repair wont be covered under warranty.
Depending on the model of DKNY you may have to go through DKNY for the part. Remember that they are manufactured by Fossil. You could save yourself a lot of time by going to your local watch repair shop.

Thanks!

Hi

Thanks for using FixYa. You can get it repired from an authorised DKNY service center or can also get it done from these tech.s--

Watches Repair Link

Please do rate the solution and revert for further assistance.

Thanks
Rylee

In your nearest jewellery shop. Battery is easy part, but for glass you may have to shop around, as glass should be ordered to exact size to fit your watch.
Do not forget to rate, please.

Si porque tengo este reloj

how do you set the time on the digital george watches?