20 Most Recent PersonalizationMall Personalized Retirement Signature Platter Questions & Answers

Operation and Care of FT900 SERIES DISHWASHERS SAVE THESE INSTRUCTIONS OPERATION MACHINE PREPARATION - Check before beginning operation. Open the machine doors and make sure all components are in their proper operating positions Pump Intake Screens must be put on holders at each pump intake (Fig.1). Fig. 1 Strainer Pans must be in place on top of each tank (Fig. 2). Fig. 2 End Caps must be correctly installed at ends of all Wash Arms (Fig. 4). Fig. 4 Wash Arms must be properly installed and latched in place (Fig. 5). Fig. 5 The Final Rinse Arm (and Dual Rinse Arm when present) must be properly installed (Fig. 7). Fig. 7 Curtains and drainback pans must be in their proper places, refer to pages 11 - 14. Strainer Baskets must be in place in Strainer Pans (Fig.3). ANK FILLING Assure proper water hardness. Recommended water hardness is 3 grains or less per gallon. Higher hardness may cause excessive formation of lime scale. Chlorides must not exceed 50 ppm. All water (and steam, if equipped) supply valves must be opened and the electric supply turned on before the machine will function. Close all drains and doors. The drain handles are located near the floor at the front of each tank. Rotate drain handles clockwise to the vertical position. The prewash tank,

Dishwashers | Answered Yesterday

The manufacturer has assigned this error or fault code to indicate a problem with the water heating circuit. Turn off the circuit breaker to the dishwasher for 30 minutes, allowing time for the appliance to cool; then restart the cycle. If error returns, check the heating element for continuity and check the wiring harness for any obvious signs of damage. If the heating element shows infinite resistance after testing with an Ohm meter, replace it.

Dishwashers | Answered 2 days ago

Why worry about the dishwasher? What are you doing about the fabric of the house? Set the heating to come on for an hour morning and night and all will survive. Otherwise all sorts of appliances will suffer approaching zero as will your house.

Dishwashers | Answered 3 days ago

Hello. From the symptom you describe, it sounds like the delay feature is enabled. This can happen if the power was interrupted(outage). The delay allows you to have the unit come on after whatever number of hours you select up to 24. A customer of mine had the same problem--get your manual and follow the directions on turning off "delay start". I hope this helps you!--Let me know the outcome or if you need more assistance!---Thanks!

Dishwashers | Answered 3 days ago

Need the make and model number of machine.

Dishwashers | Answered 3 days ago

the elements should not be red as this indicates a lack of water to cover the elements
that would account for the spinners not working as the pump will not be pumping water to make them spin
check the water level or call a technician to diagnose the problem properly and quote

Dishwashers | Answered 3 days ago

Not finding what you are looking for?
PersonalizationMall Personalized Retirement Signature Platter Logo

Popular Tags

1 questions posted

Ask a Question

Usually answered in minutes!

Top PersonalizationMall Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers


Level 3 Expert

4342 Answers

Are you a PersonalizationMall Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PersonalizationMall Dishwashers

  • PersonalizationMall Dishwashers

Most Popular Question

whirlpool dishwasher adp5400 condenser

  • Dishwashers