20 Most Recent
Belkin My Essential (ME1004-R) Wireless Router Questions & Answers
Need to put password on next solution router
Connect the router and computer to create a secure
connection between the two pieces of equipment.
To do this, plug an Ethernet cable into one of the LAN (Local
Area Network) ports located on the back of the Belkin router.
Connect the other end of the cable into the Ethernet port
located on the back of the computer (the side of the computer, if you are using
a laptop).
Access the GUI (graphic user interface) to gain access to
the router settings.
To do so, open a web browser and enter 192.168.2.1 into the
address bar of the browser.
Press "Enter" or "Return" on the
keyboard.
Click on the
"Login" hyperlink located at the top of the page. Enter
"Admin" into the username and leave the password blank.
Click "Submit" to load the GUI.
Click on the "Security" hyperlink located under "Wireless."
Select "64Bit WEP" or "128Bit WEP"
from the drop-down menu and enter in any 10-digit hexadecimal password into the
"Key1" box.
Hexadecimal is a password with both letters and numbers in
it.
Select "Apply Settings" to update the router's
security password.
Use this password to connect your computer and
on other equipment to the router.
4/20/2017 10:46:11 AM •
Belkin My...
•
Answered
on Apr 20, 2017
Forgot my network key password
For wireless or to manage the router?
If you forgot the wireless key password, you should be able to get into the router through a web interface and get or reset the wireless password.
If you don't remember the password to manage the router itself, it should have a "Reset" or "Go Local" button the back of the unit. Press and hold that for about 5-10 seconds. This will set the unit back to factory defaults and you should be able to log in again to set up your wireless settings.
4/27/2013 3:00:14 PM •
Belkin My...
•
Answered
on Apr 27, 2013
I have my router set
Hello !
The most secure ways are :
1. Hide the network name (know it by heart and give it a weird name like A78124AGB)
2. Set up a password that contains alphanumeric characters (0-9, a-z, A-Z) but also symbols (?,@,%,&,etc).
3. Set the authentication type to something uncommon.
All the best.
8/6/2011 3:23:22 PM •
Belkin My...
•
Answered
on Aug 06, 2011
I cannot make the other
just check the wireless configuration you can reset your router.
then hard wire it to any of your computer.
open the router page(write default gateway at address bar in internet explorer)
change the ssid(wireless network name)
create a security for your wireless network as well.
then configure the other computer with the same ssid
8/4/2011 11:12:30 PM •
Belkin My...
•
Answered
on Aug 04, 2011
My imac won't accept the
At the back of the unit is a tiny little reset button that you can hit with the tip of a ballpoint pen. It should be located near the power plug. If you press that and hold that button down for about 10 seconds, it will reset the unit back to factory state and you can set the unit back up like you first bought it.
7/22/2011 8:40:49 AM •
Belkin My...
•
Answered
on Jul 22, 2011
My Belkin Router model Number
If it is not working for your DSI, try going to your routers website and downloading a firmware update that would update it to version 4 (v4) and then your DSI should work!
7/11/2011 4:08:28 AM •
Belkin My...
•
Answered
on Jul 11, 2011
What the ip address to
The default IP for Belkin Wireless routers is 192.168.2.1 . try this and see if it works for you.
5/17/2011 9:08:24 PM •
Belkin My...
•
Answered
on May 17, 2011
Hi
I've tried to configure
You cannot configure a router for the first time wirelessly. You have to physically connect to it via an Ethernet cable.
5/14/2011 11:37:39 PM •
Belkin My...
•
Answered
on May 14, 2011
Not finding what you are looking for?