DBX DriveRack 260 Home Equalizer Problems & SolutionsRSS Feed
cdj 800 mk2 make high pitch noise thats it? setting up my new used tables to a pioneer 350 djm and the only noise comming out is a high pitch
It *is* possible that something is wrong with your tables, your mixer, or your amp, but it seems like 7 times out of 10, these problems are caused by a tiny fault somewhere in one of the cables, so since new cables are a hell of a lot cheaper than new electronics, I'd recommend you start there.
I have a Fisher stereo.The amp is a ca871 the eq is a ca871 the casset deck is a crw870. How do I connect these components up.
Ok, hook the amps RC OUT to the eq's LINE IN.
amps RC Pb to the eq's LINE OUT.
The tape's LINE OUT to the eqs TAPE PB
the tapes LINE IN to the EQs TAPE REC OUT.
on the eq, there should be a button to toggle between tape and source.
let me know if that works.
I saw an graphic equalizer Model NO: Q212 (website :http://www.strangeraudio.org/) and when I saw the equalizer it says "effective equalization range is 25 Hz to 16 KHz. If we connect a CD player whose frequency response is 20 Hz to 20 KHz to this graphic equalizer what will this equalizer do if it receives a 18 KHz frequency from the CD player. Will it cut those frequency or will it allow without modifying it.
Hey there, I have an AudioControl model C-101 EQ, and I just wanted to know how to hook it up to my Yamaha RX-v363 Receiver, thank you, I appreciate it.
The connections themselves are fairly simple but it pays to understand what happens in the loop.
In general, any Line-Level external processor (EQ, dynamic range expander, etc) will go into a Tape Monitor loop on a receiver. A Tape Monitor, when engaged, sends the stereo analog signal Out to the Processor, massages it and returns it to the receiver via the Tape Monitor IN connectors to be passed on to the receiver's internal processes (volume, tone, whatever).
Old school analog stereo-only receivers consistently work this way. Newer digital and audio/video receivers introduce a couple of problems: 1) digital sound processing to simulate a variety of soundfields; 2) multiple output channels, either discrete or digitally-generated.
The latter requires that whatever signal is being processed experiences a maximum of one analog-digital-analog conversion.
EVERYTHING analog coming into the modern digital receiver is automatically converted to a digital signal for internal processing unless you choose a STEREO-only or STEREO-Direct setting. Consequently, no further external analog-digital conversions would be allowed if, say, a Tape Monitor circuit was activated, and a possible feedback loop could otherwise be created in a digital-sourced selection (output to its own input), so the unit is wired to treat the Tape Mon as the first analog step in the process and defeats any pure digital sources.
In a multichannel unit, what would happen to the other channels if you sent ONLY the Front Left & Right out for processing? That logical problem also plays into the decision to defeat digital sources if the Tape Mon is activated. I don't totally agree with the engineers but that's the way it is. Nature of the digital beast.
Okay, back to the hook-up: Receiver Tape- or VCR Out to the External Processor (EQ, whatever) Preamp-, Amp-, Tape- or Rec-In; Receiver Tape- or VCR In from the External Processor (EQ, whatever) Preamp-, Amp-, Tape- or Rec-Out.
If you actually want to use an analog recording deck you could place it within the typical Equalizer's own Tape Monitor loop(s). Many have two to facilitate equalized dubbing between decks.
what kenwood or any other EQ uses transistor or coils not op-amp -looking for equalizers for home with no compression of sound,i want filters with no op-amps.Transistors and or coils for better sound stage an imaging.
As we all know, imaging is in the ear of the beholder. I would think a purist would shun EQ on principal.
I have no feelings either way but I have heard tube fanatics claim they are superior to solid state. Tomato / tomahto.
how to hook my philips cordless headphone SBC how to hook my Philips cordless headphone SBC HCO75 up to mij tv set and instructions
is the link you must use to get all information you may need. copy and paste the above link to your browser. Good luck Don't worry about the model number.The principle in which they all work is the same.
I have an ADC equalizer model # SS-100SL i'm I have an ADC equalizer model # SS-100SL i'm trying to hook it up to a pioneer receiver model # SX-1600. I also have a CD and CASS. hooked up to the reveiver. Individual components on all, the reviever, cd player, cass. player and the equalizer. So I just need help hooking the equalizer up to the receiver. On the back of the REC. I have 3 inputs (PHONO-CD-AUX/VCR) then next to that is the TAPE ADAPTOR- (REC.OUT& PLAY IN) On the back of the EQU. it has LINE IN & LINE OUT next to that is TAPE IN & OUT On the back of the CASS. has INPUT REC. next to that is OUTPUT PLAY. On the CD is FIXED and VARIABLE. Which I'm using a patch cord (red & white connectors) from the FIXED to CD input on the REC.
I NEED A OWNERS MANUAL FOR A FISHER STUDIO STANDARD EQUALIZER EQ867CAN YOU GIVE ME A SITE I CAN GO TO FOR THIS
i have a used 3.1 preamp. recently it started to make a scratching noise when the volume knob is turned. this happens every morning after the car sits all night long.
A more complete way is as follows:
Some amplifiers have a jacks labeled Left & Right "PRE OUT" and Left & Right "AMP IN" with a heavy gauge wire or strap that connects the left AMP IN & left PRE OUT together; and the right AMP IN and right PRE OUT together. Removal of the wire or strap will cause the amp to fall silent, as the low level signal no longer has a path from the PRE OUT to the AMP IN jacks. If you were to insert the EQ here, the path would be restored - but allowing you to boost or cut the level of certain frequencies BEFORE they are amplified. This is accomplished by connecting PRE OUT to EQ IN and EQ OUT to AMP IN for both the left and right channels.
As I mentioned, only some amps have these PRE OUT and AMP IN jacks - many however do not. In this case, you may be able to use the TAPE MON jacks. The TAPE MON is the Tape Monitor and appears on most "half-way decent" receivers. These jacks were provided to enable listening to a tape in nearly "real time" as it was being recorded on higher end "3 head" tape recorders. If you don't have a "3 head" tape deck (most do not), you can use these jacks the same as the PRE OUT and AMP IN jacks above. This is accomplished by connecting the TAPE OUT to EQ IN and the EQ OUT to the TAPE IN for both the left and right jacks. You would then select the source of the music - be it CD, Phono, etc. and with the EQ powered, pressing the TAPE MON button on the receiver, you could hear the difference between the EQ in the circuit and the EQ out of the circuit.
The key in the examples above is that there is always an input connected to an output. Don't connect inputs to inputs and outputs to outputs. Take your time and work one cable at a time - one end to an input and the other to the corresponding output.
Some situations may arise if using Dolby Digital, THX, etc. type input signals. Sometimes it is not possible to equalize them. If you have sources (DVD, Satellite Receivers, etc.) that have an optical or coaxial connection, those will be the ones that may have undesired affects. The familiar RCA type jacks for left and right signals should work perfectly.
I'll see if I can find a link with a picture...
Hi I would like to know how to wire up a kam keq 15 dual band graphic equalizer to my home hifi thanks
DBX DriveRack 260 Home Equalizer Tips & How Tos Tips & tricks from the Fixya community.
Have a tip for DBX DriveRack 260 Home Equalizer?
DBX DriveRack 260 Home Equalizer Unsolved ProblemsRSS Feed
my driverack260 is new and when i powered it on it says that wait for flash download what should i...
DBX DriveRack 260 Home Equalizer Manuals & Guides
DBX DriveRack 260 Home Equalizer Tech Specs
|Full Product Name||DBX DriveRack 260 Home Equalizer|
|Number of Bands||28|
|Spectrum Analyzer Display||With Graphic Display|
|Frequency Response||20 Hz - 20000000 Hz|