20 Most Recent
Audiovox 1187084pl Car Insert Designed for the Vod715, the Prov715 and the Prov716 In Pewter Questions & Answers
Cant insert radio code
wonder have you solved it now,,,,you can enter the code by turning the station wheel on the steering remote control. the radio station(changing) wheel is just below the +/pause/- control...after you turn the wheel to desired number(if you have the code) press pause to go to next number,,in the end keep press pause for 2-4 secs to register code..entering wrong code locks the set for some time,,,,the longer time as you get it wrong more number of time...hope this resolves the query....thanks
4/22/2009 5:30:16 AM •
Audiovox...
•
Answered
on Apr 22, 2009
What are the input wires on a audiovox amp777
The Audiovox AMP777 is a 4-channel power amplifier, and the input wires will depend on the audio source you are using. Typically, the amplifier will have RCA input jacks for left and right channels, and you would use RCA cables to connect the audio source to the amplifier. Some amplifiers also have a high-level input option, which would allow you to connect speaker wires directly to the amplifier's input terminals. However, it's always best to consult the user manual or contact Audiovox support for specific wiring instructions for your amplifier model.
My cd runs but will not play the cd
Quite common problem. Repair it or replace your player if repair cost is too high. Personally, I stopped using CD players time ago: I use a mp3 player.
Red light is on and subs won't play
sounds like the amp is in protection mode. try disconnecting the subs and see it the light changes to green. if it does then the subs are your problem. if the light was allways red while it was working then the subs may be disconnected inside the box or have gone bad. try using a diffrent speaker and connect to the amp.
Not finding what you are looking for?