20 Most Recent
PNY 4GB USB 2.0 Flash Drive - Grey/Black Questions & Answers
PNY is not working
the computer is not seeing it properly un plug,then refit ,are the contacts clean,
Pen drive not working what I do
If the pen drive is not recognize in any PC, that's it, it's damage and there is no way to recover anything from the pend drive, sorry. Being there.
How can i format writeprotected pendrive
To
disable the write protection:
1.From the Start menu, click "Run", type "regedit", and press <Enter> or click <OK>.
2.Navigate to HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > StorageDevicePolicies.
3.Double click on "WriteProtect" and change the value to 0 (WriteProtect = 0 for disabled; 1 for enabled).
4.Close the registry editor and restart Windows.
5.After Windows starts, test writing to your USB drive.
Important Note:
Serious problems might occur if you modify the Windows registry incorrectly. **PLEASE** make sure that you follow these steps *exactly* and *carefully*. For added protection, back up the registry before you modify it in case you have trouble so it can be restored.
For more information about how to back up and restore the registry, follow the steps as in the KB Article: http://support.microsoft.com/kb/322756/
Write protected PNY 4GB USB
Go to Start
Click Right mouse button on Computer
Click on Manage
Click on Disk Management
In the Right Panel of the drive you wish to fix
Click Delete Volume
When Volume is deleted
Click Create Volume
Follow the steps
For small drives use Fat32 not NTFS
NTFS is not portable between XP and Win 7
You may also have a virus.
Cannot format flash drive.... receive message
Usually there is a small switch or colored slide which flips between write protected and writable.
If there is no switch it may be the software that is on the drive is preventing the format, if this is the case you may need to use a boot disk like Hiren's boot Cd to format it while not booted into Windows.
Writeprotected
Plug the flash drive in your computer.
Then go to the Cmd Prompt, RunAs Administrator,
Then type Diskpart >
To list all the available Disks, type List Disks. You will see all the drives listed with a number ID. So the flashdrive might be Disk 3, or whatever.
Now type Select Disk # (whatever the flashdrive # is)
Now type Attributes clear readonly.
Now type Exit, to leave the diskpart applet
That should do it.
How can format usb
Hi there !
Just connect your usb flash disc into a usb port of your computer. Then right click mouse and you will see the FORMAT command there. Just run it and it will format your USB flash disc.
How do i remove write protection from usb pen drive
You have to be the computers administrator to change any values on any hard drive on your computer click start control panel user accounts on the users tab click the name of the computer administrator you must have full control click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7 click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP click start right click on my computer select open Right click the icon of your usb drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. if you need more help with this post a reply Hope this helps.
Decrypt files on a mac
Maybe there is a version of the software you used to encrypt that is compatible with mac ?
Not finding what you are looking for?