http://www.fixya.com/support/p690874-hoover_elite_rewind_bagless_uprightSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 03 Dec 2009 12:44:07 GMT80http://www.fixya.com/support/t3179760-vac_really_loud_now_beltmy vac is really loud now is that the belt??Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t227489-windsor_sensor_12_vacuum_no_poweri know I have power down to the last quick disconnect in the housing base. I take off the cover today and I have circuit boards, capacitors, ect., ect. I have a digital meter. Is there anything I can check and how to check? As in circuit board, burnt...Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t246371-kirby_g6_shampooerI need instructions as to how to put the shampooer together and if there is a way to make it compact enough to do stairs. ThanksThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t247223-self_propelled_wind_tunnel_vacum_willWhy doesn't my self propelled vacum not move when handle is released,when both belts are intact and roller brush moves when turned on.?Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t251981-dirt_devil_vacuum_belthow do I change this belt?Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t254405-remove_vacuum_roller_offHow do you remove roller. Powerline Limited Editon Model #4352 ThanksThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t263819-power_consumption_refridgeratorsHi thereI am in the process of buying a generator for power losses (I live in a rural area) to ensure the Fridge and Freezer are kept running. I want to assertain the power (wattage) of my Refridgerators so I can ensure I buy an appropriately sized...Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t289883-nylon_washers_bissell_9200there are two 4"dia. washers on each side on the pivot point where the handle is attached to the base these washes have slots cut into them do these slots need to line up in any particular fashion when the handle assembly is reattached to the base?...Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t304313-vacuum_cleaner_repairLOUDER THAN USUAL MOTOR BAG EMPTY FILTER CLEAN CAN'T REMOVE TOP COVER TO CHECK MOTOR WORRIED THE MOTOR WILL BURN OUT SUCKING IS WEAKER THAN USUALThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t287105-kirby_sentria_not_distributing_shampooOur new Sentria is not shampooing correctly. It is dumping the soap and water in the center only, not a full width distribution. I cleaned filters like the manual says once before and it worked. Not this time. Any ideas?Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t312011-eureka_4467av_upright_vacuum_userdo you have one you can email to me.. I am having trouble trying to figure out how or where to open my vacuum up from to feplace belt kuntripoolgal@yahoo.comThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t322583-hoover_upright_windtunnel_isntit has suction, it just wont go foreward and its hard to push. i opened the bottom part and saw that the v shape belt was loose but i dont know if thats all i have to do. i cant find a manual online for u6470-900 hoover. should replacing that one...Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t339863-dysin_vacuum_blows_air_instead_suckingHi - I have a problem with my Dyson vac, it appears to be blowing air instead of sucking it. Any ideas? Cheers. Was clogged up with shredded paper. Cleaned it out and is now blowing instead of sucking air.Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t343589-big_green_machineHow do you put the hot clean water into the Bissell Big Green Machine. It's a second hand machine and I have no instructions. Can you help me?Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t347909-given_hooverI was given a Hoover model 450 vacum cleaner i am looking for information aout this productThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t362261-kenmore_progressive_canisterHi there - My vacuum won't turn on unless the power brush is attached. When it does go on, there is no power in the power brush (the brush does not turn). I hear a flipping noise in the canister (like a broken belt). Do you have any idea why I'm...Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t373547-craftsman_vacuumI need to see a manual to get parts for craftsman vacuum model 11317060. Serial number 00259v2279Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t381119-instruction_manual_eureka_409bIt's not picking up good. I cleaned all areas and still not picking up. I have no manual because it was given to me. The motor is working .Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t396275-eureka_vacuum_belt_replace_model_4688My vacuum is not picking up.Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t400571-not_suckingWe have an Oreck XL and today it is blowing out dust instead of sucking it up. I just replaced the belt and about 6 months ago, we took it to our Oreck dealer and had it rehauled. I opened it up to check all and it all looked fine. Then I tuned on...Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t400871-tristar_mg1My tristar vacuum cleaner won't turn on. I plugged it in and nothing happens. I bought this machine about ten years ago and I want to know where to take it or who to contact. I live in Victoria, British Columbia.Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t399833-hoover_problemthe wheels on the bottom of my upright have come off , i have put them back on but i do not know where the metal clip should go and also the height ajuster for the wheels does not work, any ideas thanks kevin oatesThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t409127-panasonic_vacuum_cleaner_mc_e554the belt to drive the beater bar has comem off. it appears to be retained by a piece of fabricated wire. i cannot work out how to fit this 'retainer' can you help? john croweThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t410681-overheating_indicator_comes_straightMiele HEPA TT 2000. The overheating indicator comes on as soon as it is switched on.It did have an intermittent problem with the motor cutting out when the cable was pulled a certain way, but does not now work at all. Any suggestions? Many thanks RayThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t416273-iget_areusable_filterwhere can iget areusable filter for a hoover compact vacum cleaner model s2203-050 serial no.103051585Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t416675-kirby_manualsWhere can you get kirby Tradition 3cb manuals atThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t417029-hoover_maytag_legacyI have a hoover/maytag Legacy canister that I bought at HomeDepot. I don't have manual and I can't get the bag back in. Any help would be appreciated.Thu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t417689-changing_beltI need instructions on how to change the belt on my Hoover Elite Supreme. Thank You, Linda TroyThu, 03 Dec 2009 12:44:07 GMThttp://www.fixya.com/support/t418421-hoover_vacuum_u6655_900I was trying to clean out the hoses on my vacuum because my husband vacuumed over wet carpet and it was smelling bad. When I took the cover part off the back where the hose attaches and this plastic piece leads to the part where the dirt goes....the...Thu, 03 Dec 2009 12:44:07 GMT