Logitech Harmony One Advanced Universal Remote with Color Touch Screen - Answered Questions & Fixed issues
Error code 054 on the harmony one
Hmm I havent heard of this before. Did you try updating the firmware on the remote?
1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button will be lit.
2. Connect your remote to the computer.
3. Launch the Harmony Remote Software, and log in.
4. Click "Downloads" at the top and click "Firmware".
5. The remote will go through the firmware update.
6. Select "Yes", and click NEXT to update the remote.
What exactly does the error message say?
How do I adjust color on my Sony tv with Shaw universal remote?
Take your Shaw remote control, and follow the instructions on the back. If that does not work, telephone Shaw, and ask for technical support for TV.
Once it is setup, press the TV button on the Shaw remote control, and press the MENU button. That should show the TV's "setup" menu.
No sound on tv chanel
hi, no sound with tv but have picture, also have lost sky but works on other tv with a tv link, tv make LG Lh3000
Can harmony touch work in country with 220 volt. Does it control the home theatre lights also
Hello,
Your Logitech remote should be able to work on a 220 volt system so ling as the AC adaptor that plugs between the wall and the charger is rated 110-220v. Unplug it from the wall an read what it says on the outside. In should say "Input 110-220v" to be safe to put on a 220 system. If it is only rated 110v input power, you may need to purchase a universal power adaptor in order to provide power to the charging cradle. Another solution is to buy a "power transformer" which is a box that plugs into the wall and steps down the voltage and provides an outlet that can be used to power multiple 110 devices. What ever you do, do not plug in a 110v only device into a 220v circuit. If you do, it will "fry" the electronics rendering them useless, but it could potentially even start a fire.
With regard to your lighting system, the Harmony will emulate just about any remote controlled system that uses an IR signal. You may just need to program that device into your remote. Since you will not always want lights on or off during a movie, I would teach the remote the the audio systems * key is the same IR command as your lighting system. That way you can control the lights at the push of a button, independent of that activity.
Harmony one LCD screen got wet, how do you fix it?
use some plastic container, and put RICE, +r.control, under the rice by 24 hours, the rice will absorb the humity for touch screen.and after 24 hours use gum dryer for eliminate any residue. and try again.God bless you
How to program my logitech remote to uverse receiver
If you wish to get more details, check this site. Pull up previous posts there. Setup code list and setup proceedings to
many popular brand remote controls are given.
Three digit, four digit, five digits and two-digit code list are
there. Check the site with
patience. Surely you'll get a solution
to your problem. Search the site by
'Timeslide' option. It will make search
easy. Or, type in the brand name to
your device into its search box, and press "Enter"
My Harmony One won't charge. It's in its cradle.
I recently had this same problem. The remote displayed a "low battery"
warning and could not be used, so I left it on the charger overnight and
the next morning, it still had no charge. Everything seemed to be fine
(and I verified that it was making good contact with the charger), but
it wouldn't charge.Finally, I pulled out the battery to see if
there was any obvious problem. There didn't seem to be, but when I put
the battery back in, the remote suddenly started working (and showed
about a 75% charge).So far, it seems to be working (and charging) correctly since then.
Not finding what you are looking for?