http://www.fixya.com/support/p645956-hoover_u5194_900_mach5_multi_chamber_cycSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 07 Dec 2009 12:48:56 GMT80http://www.fixya.com/support/t2524407-brush_will_not_turn_brush_control_stuckI changed the belts, but the brush roll still will not spin. Also, the brush control is stuck in the "Off" position. This seems to be a common problem with no solutions....?Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1125468-brush_spin_hoover_mach_5I've replaced the belts already but the brush won't spinMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2258429-hoover_mach6_brushes_dont_turnHoover mach6 the brushes usually don't turn. Sometimes for a few minutes they will rotate but not strong enough to pick up anything off the carpet.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t3031369-mach_6_shuts_offHas anyone found a definative casue of this?Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2691886-hoover_freemotion_pets_200w_lost_most_sWas working fine then csme to use it this morning and although the motor is whirring away powerfully, there is virtually no suction! It's been emptied and there are no blockages anywhereMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t3068701-hoover_mach_5_turns_off_after_10_minutesHoover mach 5 turns off after 10 minutes of useMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2981878-vacuum_just_stopped_turnThe vacuum cleaner is 3 months old, just stopped and won't turn onMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2981184-works_doesntThe vacuum runs for a while, then stops. i let it sit a while then it works again.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2535249-our_mach_5_turns_off_after_running_aboutOur Mach 5 turns off after running for about 5 minutes and smells hot!! Help!!! We have 3 kids and I need to Vacumn.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2348025-roller_turns_but_makes_noisetook roller apart to clean and replaced everything and now when roller turns making unusual noise; if you stop using roller vacuum operates normallyMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1535836-shutting_off_due_overheatingThe machine shuts down after less than two minutes of running. When I take the canister out, the base of the machine feels very hot. I have cleaned the plastic filter that you lift out of the base of the unit but that has not helped. I ordered a new...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1720660-remove_plastic_shield_access_dirt_cupProb.1 Turn cleaner upside down. Where brush roller is, there is a clear face plate before you can get to the main shield. Trying to remove inside shield to clean dirt that's trapped. Took all screws out and right side lifts up but left side won't...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1816758-need_clean_main_filterI need to clean out the filter where all the dirt goes since this is not a bag-less vaccume then alot of dust does stay in there and i'm not sure how to clean it out.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1825124-no_suction_hoover_mach_5_vacuumIt was working fine until I took the canister out to empty it. Wind is getting inside the canister as I can see items flying around. I had it cleaned and the belt replaced and was told this would solve the problem. The very next time I used the...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2282478-vacuum_turns_off_mid_cleaningI can vacuum for about 15 min. before it shuts off. I have taken it apart to find any kind of blockage that maybe causing the motor to heat up so fast only to no avail. I have dealt with machines with an auto shut off in the event of over heating,...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2315728-no_suction_wind_tunnel_vaccum_cleanerI have a hoover (windtunnel) vaccum cleaner and will not get any sucktion. the rollers are fine. When I roll the vaccum the brush control will remain off, I believe that this is creating the problem of the vaccum cleaner not having any sucktion..Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2037729-shut_off_will_not_restartI have a Hoover Bagless Multi-chamber cyclonic. The model number is U5194-900 and the serial number is 040800130499. I was using my vacuum and it was stopped. I cleaned everything and let it sit for a while and it still would not not start again.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t2072163-no_manualI have no manual or instructions for filter changes for the Hoover DM4494 Upright Bagless Vacuum Cleaner. Please advise. Thank you.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1724928-hoover_mach_6_bagless_overheats_shutsmy hoover mach 6 bagless overheats, shuts off for about an 1 hr will run again, all filters are clean, no blocks in hoses, how can i fix this problemMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1700098-got_vacumn_from_friend_ungradedi got a vacumn from a friend who ungraded and though i used at her home when i got it home it would not turn on when plugged in and i check everything and no use. my friend lost her manual. im in my 60's and on a disability fixed income so cant...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t1486720-figure_outI can't figure out how to get all the lint/junk out of my bagless hoover mach 4.Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t227489-windsor_sensor_12_vacuum_no_poweri know I have power down to the last quick disconnect in the housing base. I take off the cover today and I have circuit boards, capacitors, ect., ect. I have a digital meter. Is there anything I can check and how to check? As in circuit board, burnt...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t232886-kenmore_canister_model_116_25512_startVacuum cleaner only runs when hose is inserted into Power Mate attachment, and only when switch (located on the hose unit) is set to "carpet." Does not turn on when set to "floors). When hose is not hooked up to the Power Mate, I can't turn the unit...Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t235496-shampooing_carpetdon't know how to hook up carpet cleaning attachmentsMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t236618-bissell_630_wI am having a problem with my new vacuum. I used it twice and I no longer have jun going into the pail. I cleared the lower suction tube and cleaned the filters and stillnothing going in. I have only had it for about a month and bought it t Wal-Mart....Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t246371-kirby_g6_shampooerI need instructions as to how to put the shampooer together and if there is a way to make it compact enough to do stairs. ThanksMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t247223-self_propelled_wind_tunnel_vacum_willWhy doesn't my self propelled vacum not move when handle is released,when both belts are intact and roller brush moves when turned on.?Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t251981-dirt_devil_vacuum_belthow do I change this belt?Mon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t254405-remove_vacuum_roller_offHow do you remove roller. Powerline Limited Editon Model #4352 ThanksMon, 07 Dec 2009 12:48:56 GMThttp://www.fixya.com/support/t260486-pullman_built_in_vacuum_cleaning_systemhaving problem with lose of suctionMon, 07 Dec 2009 12:48:56 GMT