please help me to get a free download for my printer
Posted by cie09252 on
clik in Download Drivers, chose your operating system, clik acept and save file.
Posted on Jan 14, 2009
how to change the ink of an epson stylus sx215
Posted by saleherve on
press the index sheet button and the scan button at the same time, you then get setup menu. use" >" to select "change ink cartidge". the ink cartidge will move to the opening position. lift the grey plastic clip at the back, and it will open towards you. then they just pull out
Posted on Jul 19, 2010
I've tried the manual technique to change the ink cartridges and it has no effect,I need the carrage to stay in the change position but can't get it to do this,how can I change the cartidges ?
When I lift the top of the printer,nothing happens,on my old printer the carrage went straight to change position,this one does'ent want to play,can you help ??
Posted by coxpaul4 on
i had the same problem as this.
the manuel told me to put the ink in the printer before i had installed it, this however seems impossible.
instal your printer first. when it is instaled go to printer settings, then click on maintenance, then click on the option that says ink cartridge replacement. Follow the instructions and this will bring the cartridge to the change position!!
failing this you can unplug your printer quickly after you turn it on when the cartridges move, then you can manualy move into position. Not sure how good for your printer this is, but it works.
Posted on Jan 12, 2009
Recently my black ink ran out and as the inks are so expensive I went to my local computer shop who sell cheaper compatible versions - these are inkrite E714 etc. They advised me that on the first change I had to change all four inks at the same time. I have done this but the printer will not work , it wont print anything and it shows the cartridges as all being empty on the screen . I dont know what to do , can anyone help ? I start a course next week so need my printer.
Posted by sazza on
hi.make sure there is no tape or dirt on cartridge chip contacts.if still no joy trying iserting one cartridge at a time then installing.say insert black then will say others carts missing red blue yellow.keep going till they are installed.sometimes helps.make sure the carts have lastest chips installed version 5 or higher if compatable cart.should not be a problem if bought from epson.eg t711 etc will fit but must be new carts with new chip otherwise may not accept.i belive the sx100 has something like t811 or something.this may be the new chip.otherwise may just be a faulty chip on the cart.you can get refillable carts or ciss system on ebay you put in your own ink.they are brillant.cart chips reset when low ink.hope this may help.
Posted on Jun 07, 2009
my printer will not work wifi
Posted by m_verplank on
you have to add the printer when its wireless, even if you had added it via cable, as they are two different printers. add printer and choose network and make sure it is switched on and it should appear after a minute in the list
Posted on Feb 13, 2011
how could i find free download of epson stylus c59 driver?or is any other driver compatible to this driver?
Posted by oblate on
INSTRUCTIONS SUPPLIED TOO VAGUE TO BE OF ANY USE.
CANNOT SEE ANY TYPE OF PAPER SLIDE OR CHUTE
CAN ANYONE TELL ME HOW TO LOAD THE PAPER?
Posted by jaw4s on
Hey!! I just had the same problem, was feeling pretty stupid! You've prob already figured it out but just incase any one else is looking for an answer...
When you look into where you're supposed to load the paper there is a grey thing about halfway over. This is the guide. It doesnt tell you properly in the instructions you need to move it but you do. It doesnt slide very easily.. thats why I thought it was just a part of the printer. But if you push it back it'll slide easier. Anyways move this all the way to the left, load your paper then bring it back to the right as close to the paper as you can
Posted on Jul 03, 2009
The black ink will not print on my Epson Stylus SX600FW printer. Th eprinter was left for a few weeks without black ink. Has the needle heads dried up and become clogged? How can I fix this problem?
Posted by info42873 on
I have an Epson sx600fw which has had a problem printing with black ink. I spent alot of money trying genuine and cheap inks as official advice is to replace with a genuine epson cartridge and clean up to 6 times before seeking further help. Tried this to no avail. By accident I found that if you set the paper type to glossy or photo then miraculously the black will work but in this setting it is slow. Epson replace the printer under warranty but I have just received a new one and it has exactly the same problem. I am slightly reluctant to buy another set of genuine inks to waste through 6 cleaning cycles as they are over £35 so am not sure what to do but I guess I will approach Epson again.
Posted on Nov 05, 2009
i have epson tx110 and all the lights keeps on flashing and says general error?
Posted by skylander0... on
This error means that some mechanical parts of your printer is in trouble. This could be some of the causes:
1. The print head is stuck somewhere or is unable to move because of some blockage in the printer's bay.
2. If you are using a Continuous Ink System, then the tubes might have blocked the print heads from moving.
To resolve, turn OFF your printer. Remove such blockage then turn the printer back ON.
Posted on Oct 06, 2010
Hi can anyone tell me where i can download a service utility for my printer. I already have SSC service utility ver. 4.30. But this does not cover my printer model. Can anybody help....
Posted by gordju on
2,507 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: