20 Most Recent
- Page 6 Questions & Answers
Printer TX550W has message "A printer error has occurred. Turn off and then on. See your documentation".
Hi, this error message usually caused by jammed papers or foreign objects inside your printer. To resolve this issue, please try the following steps.
1. Turn off the printer.2. Open the scanner unit.3. Check for any jammed papers or foreign objects then remove it.4. Check the ink cartridges and lids if push down fully.5. Close the scanner unit.6. Turn on the printer.
If the same error reappears, try the following.
1. Turn off the printer.2. Open the scanner unit.3. Remove all the ink cartridges.4. Turn on the printer >> your printer will display install ink cartridges.5. Install all the ink cartridges, make sure it clicks into place and also the lids should be push down fully.5. Close the scanner unit.6. Press the Start or OK button to charge the cartridges.
If the issue persists, your unit will require service. Please contact Epson so they can check if your printer is still under warranty or ask them for the nearest service center in your area.
on Mar 05, 2014
HOW TO LOAD PAPER INTO EPSON SX 100
Hey!! I just had the same problem, was feeling pretty stupid! You've prob already figured it out but just incase any one else is looking for an answer...
When you look into where you're supposed to load the paper there is a grey thing about halfway over. This is the guide. It doesnt tell you properly in the instructions you need to move it but you do. It doesnt slide very easily.. thats why I thought it was just a part of the printer. But if you push it back it'll slide easier. Anyways move this all the way to the left, load your paper then bring it back to the right as close to the paper as you can
on Feb 10, 2014
Not finding what you are looking for?