20 Most Recent Acer X193W LCD Monitor Questions & Answers


Skip the Game intro by pressing the enter key.Then move your mouse to the toppest position .Then press the down arrow.You will hear a sound.Press again and press enter[now you entered options menu]Press enter[now in settings]Press left arrow key to decrease resolution[4times]press enter .Press again to confirm.hope you problem is gone .I had the same problem and I used this way to solve that.

Acer X193W LCD... | Answered on Apr 04, 2018


Could be a driver issue with your monitor. Safe mode bypasses them with working defaults.

Acer X193W LCD... | Answered on Aug 31, 2017


in very first you have to check the pc with another display monitor
if display problem still available check the graphic card and video driver. remove the driver and reboot. check display resolution and refresh rate

Acer X193W LCD... | Answered on Apr 13, 2017


Hello Shaul

Hints:
1) Change to Plug and Play monitor driver
2) try changing the screen resolution on the PC, and driver.
3) try changing to 60Hz the refresh rate of the monitor on driver section or options on the monitor driver.
Carl

Acer X193W LCD... | Answered on Feb 02, 2017


Likely dead monitor. Test on other pc.

Acer X193W LCD... | Answered on Jun 29, 2016


You should see a ***** located on the round base,just remove that with Philips(star) ***** driver and that`s it :)

Acer X193W LCD... | Answered on Mar 17, 2016


Replace the capacitors on the power board (4 Electrolytic capacitors)

Acer X193W LCD... | Answered on Feb 25, 2016


Check out for loose power cables, if trouble persist you might need to replace some of its capacitors.

Acer X193W LCD... | Answered on Sep 18, 2015


Hi,

To my knowledge, it is compatible and certainly would work with XP. Since this monitor has both DVI and VGA inputs make is compatible for most video cards or even a built-in video of the PC. If for some reason the Acer X193W would not work with your Windows XP PC, possible reasons are:
  • Screen Resolution and/or Screen refresh Rate of the PC's Display Properties too high, try lowering them down;
  • hardware fault either on the monitor or video card;
  • incorrect/missing drivers of the video card;
  • it is being hooked as a secondary monitor and the dual/twin view is not activated.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Acer X193W LCD... | Answered on Jul 23, 2015


there maybe faulty installed hardware on your PC. remove those hardware like sound & video card (if any), PCI modem, CD/DVD ROM, etc. turn on your PC without those hardware & if/ there's nothings change?..it means that there is no wrong with your PC's hardware. turn the PC off, re insert IDE & power supplies cable of your hard disk drive to make it sure that the HDD is properly connected & being detect by the system. remove the memory card and clean or wipe the connector surface of the RAM with tissue paper. (change new memory card if needed). check the mother board C-MOS 3 volts battery if it is volts sufficiently .turn your desktop on & wait for good results.( Reformatting your OS is also recommended.)GOOD LUCK!

Acer X193W LCD... | Answered on Aug 04, 2014


Try it on another PC nad also check the VGA cable and all the pins first.

Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague

http://www.badcaps.net

Acer X193W LCD... | Answered on May 05, 2014


Well it sounds like you un-seated the cable that send the picture to to the monitor. The reason you are only getting a white screen is that the backlight is on but there is no data coming through to display.
The cable usually is a ribbon that fits into a slot. The slot then locks by pushing down on the cable and that makes the connection. It is easy to pull this cable out of the slot slightly (or all the way) and this will cause the problem that you are experiencing.
I'm not sure of your exact model but the cable and connection looks something like this:http://mwolk.com/blog/wp-content/uploads/2009/06/laptop_screen_replacement_datacable.jpg
As for fixing your wireless, you usually don't need to do anything to the laptops display. You should be able to remove the bottom cover and access the wireless card from there. The antenna are the black and white wires that are coming off the wireless card.
You can check those connections as well as, in most cases, remove the card and replace it with one that works. This should be a picture of your model or similar, you can see where the wireless card is located:http://www.insidemylaptop.com/images/Acer-Aspire-5610z/lapatop-disassembly-03.jpg

Acer X193W LCD... | Answered on Feb 24, 2014

Not finding what you are looking for?

260 questions posted

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2679 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1175 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Acer

  • X Acer

Most Popular Question

39 m having problem acer x 193

  • Computers & Internet
Loading...