OKI C5550N Multifunction Printer - Color LED - 32 ppm Mono - 20 ppm Color - 1200 x 600 dpi - Copier - Answered Questions & Fixed issues
FATAL ERROR 923
923 - black image drum lock error
make sure the black drum is in correctly
make sure black toner is locked
reboot machine
8/1/2012 10:09:54 PM •
OKI C5550N...
•
Answered
on Aug 01, 2012
•
8,309 views
OKI 5550mfp Fax Problems
error 209 - Media Table Download Failure MediaTable Download to PU failed. Reboot.
CU firmware detected an anomaly in behavior in PU (including a violation of communication protocol between CU and PU).
are you suing unusual sized paper?
3/29/2010 4:31:58 PM •
OKI C5550N...
•
Answered
on Mar 29, 2010
•
740 views
'928 Fatal Error message' on OKI C5550MFP
928 - fuser motor lock error
take out fuser and check for paper stuck on roller
make sure roller can move
if roller is stuck or damaged, repalce fuser unit
3/29/2010 4:27:55 PM •
OKI C5550N...
•
Answered
on Mar 29, 2010
•
23,871 views
How to reset fuser life error
the best soloution is to replace the unit with a brand new one as reset fuses are difficult to work with on fuser units but if you search the internet you might be able to find a reset kit from alibaba or amazon
10/27/2015 10:45:37 AM •
OKI C Office...
•
Answered
on Oct 27, 2015
•
233 views
OKI C9800 CYAN TONER SENSOR ERROR
remove drum units and clean optical sensors located at the back end of he drum slots and clean corresponding reflective plates on drum units
10/27/2015 10:40:48 AM •
OKI C Office...
•
Answered
on Oct 27, 2015
•
310 views
How to reset drums on oki c5950
Amber's solution worked on an oki c5150 as well as on her 5500.
At first, I got into other menus and did not see what she'd described. I cancelled out, then re-ran her procedure following its steps EXACTLY... At the very end, I may have seen one additional message - "EXECUTE" - which I "entered" to launch the process. Printer now works while I find instructions on how to replace "just the drum".
The OEM drum assembly is very easy to change but costs about $125. I found (on Universal Ink & Toner) a drum-only replacement for $30, but there was no instruction sheet with it. This solution has allowed me to keep working while I figure out how to install the new drum. Print quality was excellent right up until the manufacturer's internal counter shut printing down. Quality remains excellent after applying the above solution.
THANK YOU AMBER
Dave
6/27/2015 11:56:45 PM •
OKI C Office...
•
Answered
on Jun 27, 2015
•
660 views
OKI C9800 NON PAPER SENSE ERROR
remove the toner/drums and transfer belt. on the right side is the reg rollers. there is a black arm and sensor the detects the paper weight etc there. that will control the paper sense errors, make sure it moves freeley, clear of paper, dust etc.
12/17/2014 5:27:45 PM •
OKI C Office...
•
Answered
on Dec 17, 2014
•
965 views
My Okidata C330dn has a "Service Call 991:Error"
probably one of colour cartridges (usually not original from OKI) is updetting the printers logic Swap they around (even if you have to use old cartridges), find offending one and replace.
Simple.
7/15/2014 12:21:54 PM •
OKI C Office...
•
Answered
on Jul 15, 2014
•
609 views
Paper jamed code 381
Press the OPEN button and open the top coverTake out the image drum unit, place it on a flat surface, and cover it with black paper.Remove any jammed paper in the direction of the arrow. Remove in the direction of the arrow any paper jammed the inside front of the printer.Pull out toward the front of the printer any paper jammed at the fuser unit, with the fuser unit lever (blue) left turned in the direction of the arrow. Install the image drum unit in the printer so as to situate the K toner cartridge toward the front of the printer. Close the top cover.***If you need any technical help on printer then you can
reach at here.
2/15/2013 6:24:52 AM •
OKI C Office...
•
Answered
on Feb 15, 2013
•
171 views
C M Y K blank test page
Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles. If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer than replace the print head.
12/7/2012 10:58:25 AM •
OKI C Office...
•
Answered
on Dec 07, 2012
•
111 views
Not finding what you are looking for?