20 Most Recent Canon PIXMA MP210 Photo All-In-One Printer - Page 9 Questions & Answers

changed new cartridges

Welcome to Fixya,Click on the link below for you to download the user's manual for this printer :PIXMA MP210 ManualIt has comprehensive step by step procedures on how to scan a document/pictures and more.Just click on "Brochures and Manuals" then hit "Download" icon.Thanks for using Fixya.

http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp210#DriversAndSoftware

Hello! Here is your solution.
1. Press Stop/Reset button for 5 seconds. 2. After 5 seconds your printer will start one process. 3. Now release to hold the button.
Now your printer is ready to use.... thanks

Hello!
Here is your solution. 1. Press reset/stop button for 5 seconds without releasing button. 2. After 5 seconds your printer will start one process..release the button. 3. Now your printer is ready to use..... thanks

Hi! There is an easiest way to clean up your printers head. Check on the right side of your printer.... there must be sign of setting (ie. sign of plier and brush).... 1. press that button and watch the printer LCD display.. 2. Press contineously until it display (u) small one.. not (U). 3. After display u press black or color button.... your printer will start cleaning works and it print one page. 4. After completing, take the paper and put into your printer scanner... and press black/color button.
That is the way to clean up your printers head.... good luck

Try the following procedure for Error E23

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. green led(Light) should be on
3. While holding the Power button down, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons(1.The power button 2.Resume button)
   
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Restart the printer.
   

This should work.

Press Stop/Reset button for 5 seconds without release. After 5 seconds your printer will start processing... t hanks good luck

Press the STOP / Reset for 5 - 15 seconds wait until the led display process. Thanks

If you wanna locate your serial number follow the instruction. 1. Open your printer i.e. a place where your cartridge fixed. 2. See the bottom of your printer bed but after opening. 3. You will find your Serial number in there..... thanks

An E3 error code in a Canon MP210 printer is frustrating. This code reflects a paper jam that is not always apparent immediately and can be indicative of other problems.

Remove the jammed paper by pulling it from the front or top of the printer. If it does not come out, restart the printer to eject the paper. If the paper fails to come out or rips, remove the cover and retry. Once you have removed all visible paper, check paper sensor paths for debris or damage, blowing it out as needed.

Reload the paper as recommended and print a test page using the printer's software. If the error continues, the sensor that generates the error may be damaged. If so, take your printer to an authorized service center.

Hello!

After you installed the new cartridge, just press and hold the stop/reset button for at least 5 seconds. The printer will restart then.
Do it twice if both cartridge have been replaced. This will reset the counter for the black and colored cartridge..

Please sure your Error No. display on your Printer LCD.. and send me. I 'll try to help as much as I can... thanks

Hi there
This is a Carriage error take a good look at the carriage that the inks are in and see if they are sitting ok and also do the next incise there some thing there stopping it from moving.


Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Error E4 is caused by Scanner encoding problem. To solve your problem kindly change your Scanner board.. there is no other way to repair Error E4 ...thanks

Pull up your scanner board and remove your paper jam .... thanks

Error 5200 and Error P08 are same.. Remove your catridge for few minutes and replace ...

Your printer might be out of paper.. so try this..... press Black/Color button... if it doesn't work turn off your printer and press paper feeder on the back side and press the power button with holding the paper feeder. Don release it until the process of printer is complete... thanks

This page should have your manual:

http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp210#BrochuresAndManuals

Hope that helps!