20 Most Recent
Sharp INKJET FAX UX-A1000 Questions & Answers
How do I turn of the fax mode
Do you mean that you want to toggle the unit to TEL or TAD Mode? When there is no document in the feeder, press the Resolution/Reception Mode button to toggle between the FAX, TEL and TAD modes. The Resolution/Reception button is at the top of the row of buttons to the right of the number pad. There is an arrow that will point to the current setting in the LCD window. (It points up for the TEL and FAX modes.) The TAD mode is only accessible if you have set the out-going message. (If there is no out-going message, you toggle between FAX and TEL.) The manual for the Sharp FAX UX-A1000 is available here:
http://www.specsserver.com/CACHE/FILE22348.PDF . I hope this helps. Cindy Wells
Sharp Inkjet UX A 1000
I had the same problem and, like you, went to the internet to find a solution. One answer I found was to unplug the vax, wait one minute and then replug it. This didn't solve the problem for me. Out of desperation, I printed the fax "Help" pagea nd, lo and behold, after it printed my Sharp 510 Fax was back to normal.
Cannot answer a incoming call
Make sure that if you DO NOT subscribe to DISTINCTIVE RING that it is set to the OFF SETTING! had to figure this out on my own!
Missing part of page
I would go through the menu till you maintence ,then find system restore and press yes or print to execute.This will put it back to factory specs.If that does not help you probably have a bad stepping motor.
Not finding what you are looking for?