JVC LT-47X788 47 in. LCD HDTV - Answered Questions & Fixed issues

0helpful
2answers

Replaced panel, mother board, analog board and

I had a similar problem with my 42 in Philips LCD HDTV.



Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors. Many electronics companies were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.


Here are some options for you.



1. Have it fixed by a professional $$$$$$$???????



2. Open your TV and find PSB. Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $100



3. Remove and then replace individual faulty caps. This takes some soldering skill.



Caps are inexpensive and if you can take care of it yourself it will save you hundreds.



I have a tip/tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. It's called: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well, so if you would like to view them check it again soon. Let me know if I can do anything to help.


Hope this helps and Good luck.


Kaufman605

1/30/2015 6:15:36 AM • JVC LT-47X788 47... • Answered on Jan 30, 2015 • 271 views
0helpful
1answer

Tv went dead then we smelled "electricity" smell like something blew. tv is completely dead. any options?

sounds like a blown internal fuse. unless you are savvy with a soldering iron you'll need to take it to a TV repair man. i assume its out of its warranty period?
3/24/2014 7:18:46 AM • JVC LT-47X788 47... • Answered on Mar 24, 2014 • 189 views
0helpful
1answer

Thin line down middle screen

Check the connection wire [LVDS cable] that connects LCD panel to T'Con bard for any loose contact. Re-seat it once and check.
9/17/2013 12:46:42 PM • JVC LT-47X788 47... • Answered on Sep 17, 2013 • 68 views
0helpful
1answer

When tv is on it always shows which mode i am in on top corner of picture

take batterries out of remote and unplu tv for 3 to 5 minutes
2/11/2013 10:59:25 AM • JVC LT-47X788 47... • Answered on Feb 11, 2013 • 35 views
0helpful
1answer

LT-47X788 PICTURE GOES OUT STILL HAS SOUND AND BACK LIGHT

you need a iverter or the display is going bad
1/31/2013 5:16:56 AM • JVC LT-47X788 47... • Answered on Jan 31, 2013 • 111 views
0helpful
1answer

PICTURE GOES OUT

sounds like bad inverter board
1/31/2013 4:39:36 AM • JVC LT-47X788 47... • Answered on Jan 31, 2013 • 79 views
0helpful
1answer

I am having difficulty mounting my JVC 47X788 TV.

Download the user manual to your TV from internet. Click here to download it.
7/30/2012 11:50:20 AM • JVC LT-47X788 47... • Answered on Jul 30, 2012 • 85 views
0helpful
1answer

Mounting instructions for a JVC 47X788

Hey damfinebroin,Check out this link for the Manual of JVC LT TelevisonsGood Luck
7/29/2012 11:38:46 PM • JVC LT-47X788 47... • Answered on Jul 29, 2012 • 118 views
0helpful
1answer

FI have a jvc tv with a living solutions remote

look to ur manual at the back u see to the code....
5/6/2011 12:48:51 AM • JVC LT-47X788 47... • Answered on May 06, 2011 • 102 views
0helpful
1answer

No power on TV - JVC LT-47X788 47 in. HDTV LCD

Power supply board is dead.U have a LED light indicator on LCD panel flashing?The tv is completely dead,no LED light at all?Tries Website like Shopjimmy.com.Ebay.com to buy a refurbish power supply for the replacement.
5/7/2010 9:13:36 PM • JVC LT-47X788 47... • Answered on May 07, 2010 • 771 views
0helpful
1answer

I just purchased a JVC 47

1. remove the 4 screws on the back of the TV (these are located in the deep holes above the stand)

2. after the screws are removed, the TV will lift from the stand.

The stands sits inside the TV. after the screws are removed the TV will still sit on the stand. you (and someone else) will need to lift it from the stand.
11/10/2009 9:37:29 PM • JVC LT-47X788 47... • Answered on Nov 10, 2009 • 942 views
0helpful
1answer

Need codes for jvc tv

0060,0026,0197,0069,0160
7/31/2009 4:48:03 AM • JVC LT-47X788 47... • Answered on Jul 31, 2009 • 317 views
0helpful
1answer

Xbox 360 hookup problem

Check the video cable coming out of the xbox, depending on which model xbox it is (arcade, pro, elite etc.) it will most likely have both component cables - green, blue and red or RCA cables - Yellow, red and white. It sounds as if your JVC would only be able to run RCA cables (due to its age) so use the yellow cable for video and white and red (or just white if you only have a yellow and white input) and then make sure the switch located on the cable is switched to "standard" and not "hi definition" hope it helps. [email protected] -if you have any further problems
7/6/2009 11:21:44 PM • JVC LT-47X788 47... • Answered on Jul 06, 2009 • 343 views
0helpful
1answer

Can't connect XBOX 360 please help!

How many video ports does it have? You may have to search through video 1, 2, 3, or switch the TV itself to component/HDMI depending, with the remote. Should be with an 'input' button.

My tv has a list with HDMI, SVIDEO, COMPONENT, PC, ect. and its a 1080p one, im just assuming all HDTV's have a list
2/5/2009 3:21:04 AM • JVC LT-47X788 47... • Answered on Feb 05, 2009 • 925 views
0helpful
1answer

Just bought JVC lt47x788 and

Here is a link to download the manual. Let me know if this helps and please rate this solution.  lone99star Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee
1/11/2009 5:11:42 AM • JVC LT-47X788 47... • Answered on Jan 11, 2009 • 414 views
0helpful
1answer

My JVC 58in. Flat screen blinks?

The cable connections for your TV are not connected properly or are loose or the cables might have damage or the connection ports are broken.
12/6/2022 5:26:37 PM • JVC LT Televison... • Answered on Dec 06, 2022 • 43 views
0helpful
2answers

The USB will not work for pausing live TV how can I fix this?

no info generic answer read owners manual or search online for one
5/14/2022 12:50:19 PM • JVC LT Televison... • Answered on May 14, 2022 • 277 views
0helpful
1answer

JVC TV model,s avk14t3-1 has sound and no picture in audio-video mode

it needs service, that means using tools and meters and spare parts to find cause. dead screen black screened at all times.? even in HD TV antenna mode for HD TV? or just the remote CLICKER batteries dead. tell things that work and no not work , even LED actions. the maker has no books on this old TV https://jvcproducts.com/us/contact/support.html here they are ask them>? what rare TV. good luck fixing any RARE TV. moved you to TELEVISION.
3/24/2022 11:25:05 AM • JVC LT Televison... • Answered on Mar 24, 2022 • 91 views
0helpful
1answer

TV is just over one month old - screen started getting darker and darker in pathes, now more than 60%, tried resetting all settings to default, tried all inputs (Video, HDMI, RF) all the same result -

Return it to your place of purchase and get something else anything else you wouldn't believe how many people are having Issues with the LT series get rid of it.
1/4/2018 12:22:16 PM • JVC LT Televison... • Answered on Jan 04, 2018 • 114 views
Not finding what you are looking for?
JVC LT-47X788 47 in. LCD HDTV Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...