20 Most Recent Bissell 52889 Flip-Ease All-in-One Vacuum and Mop Vacuum Questions & Answers

bring it to me at 206 west lordeman kokomo Indiana 46901 I can repair it for under 30 dollars depending on the price of the part whitch is based on if you want new or used parts or call 765-236-7524 and ask for Joshua grimes

User’s Guides can be downloaded at www.bissell.com
On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
User Guide will be displayed as a PDF file.

Follow the link below to download your manual:
http://www.bissell.com/searchresults.aspx?searchtext=5288&mode=userguides

Providing the charger is working must be the battery or input socket. Get charger checked out 1st...

download from the bissell website

It sounds like you have a faulty gasket and to find if this is the problem you will have to find where they connect and look at the gasket/ or it might be a little round rubber ring. If you do find a broken rubber ring take it to your local hardware store and have them match it up and then just put it on and you should be all set or the easiest solution to this is store it empty and fill it when you are going to use it.

soap probably dried up and clogge the ports,always run clean warm water through the unit till the soap is cleaned out

here is the manual, I hope this helps!
http://www.bissell.com/images/UserGuides/5288_606.pdf

Here are some troubleshooting steps you can try: Check the clean water tank: Ensure that the clean water tank is not empty and is filled with warm tap water and the appropriate Bissell solution. The cap of the clean water tank should be properly closed. Re-seat the water tank: Remove the clean water tank from the machine and then re-seat it back into the machine. Check for clogs: There could be clogs in the system that are preventing the water from dispensing. Check the pump motor: If the above steps don't work, there could be a more technical problem like a malfunctioning pump motor. If these steps do not resolve the issue, it may be best to contact Bissell customer service or a professional for further assistance. Bissell Carpet Cleaner Not Dispensing Water [SOLVED] (vacuupedia.net)

No one says the output voltage and amperage, you just buy them for the Bex Bissell unit. They are dual voltage in 110 to 220. If you have the old one, it will be written in tiny writing on the charger, usually white writing on the face and engraved on the inner surface where the pins are. There are a number in the link from Walmart, eBay and Amazon. https://www.google.com/search?q=bissell+spotlifter+1715+charger+replacement ..

If your Bissell Little Green Machine has no suction at the hose end but good suction underneath the dirty water tank, try these steps: check for clogs in the hose and attachment, ensure the tank and filters are properly seated, test without an attachment, inspect for damaged hoses or seals, clean the machine, and run hot water through the hose. If the issue persists, contact Bissell customer support for assistance or consult your user manual for specific troubleshooting steps.

As per wiring diagram on Page 20 of service manual, there is no fuse. Microsoft Word - ProHeat2XServiceGuide Revision 2-2-10.doc (evacuumstore.com)