20 Most Recent Sony BDP-S300 Blu-Ray Disc Player - Page 8 Questions & Answers

Very late to post, but mayby someone will need this: just hold down the play button for at least 10 to 15 seconds to activate or deactivate the built-in child lock on this model.

see this causes and fix it. God bless youIf your mini DVD player reads "No Disc" after you've loaded the disc, it means the machine isn't reading the DVD. Take the DVD out again and clean it. It's quite possible that the disc is simply dirty and cleaning it will solve the problem immediately. If you try several different discs and clean them and you still receive a reading saying "No Disc," then the problem is in the laser and this will need to be fixed by a professional.Clean a DVD disc:

1. Hold the disc by its central hub and outside edge.
2. Blow dust from the bottom surface with a can of compressed air.
3. Clean dirt and fingerprints from the bottom surface with a lint-free cloth dampened with CD/DVD-cleaning fluid or denatured alcohol, wiping from the center outward.
4. Clean the objective lens:
5. Remove the housing and lift the hold-down clamp to expose the lens.
6. Remove dust with canned air or soft brush. If needed, use a foam swab or a camera-lens tissue dampened with lens fluid

falla wait mucho tienpo lo apage pero persite la falla

All DVDs might not play with a blu-ray player.

The disc tray does not eject when the OPEN/CLOSE button is pressed. Solution
Follow the steps below to troubleshoot this issue.

IMPORTANT: The disc tray will not open while a disc is loading; this is normal operation. If this is the case, wait until the disc is finished loading before pressing the OPEN/CLOSE button to open the disc tray.

1. Make sure the disc tray is not locked; if necessary,
2. Perform a power reset.
   1. Press and hold the POWER button for 10 seconds until the BD player turns off.
   2. After the BD player turns off, press the POWER button again to turn it back on.
3. Attempt to open the disc tray by pressing the OPEN/CLOSE button on the front of the BD player.
4. If the disc tray still does not open and a disc is stuck inside, follow the steps below to force the disc tray to eject:
   1. Turn off the BD player.
   2. Turn the BD player back on.
   3. Immediately after POWER ON is displayed, press the STOP button on the front of the player. IMPORTANT: Only use the STOP button on the front of the BD player. The remote control cannot be used for this operation.
      NOTES:
      
      • The disc tray should eject and the BD player will turn off. If it does not eject, repeat steps A-C.
      • It may be necessary to press the STOP button in step C two or three times.

If the issue is still unresolved, service may be required