20 Most Recent Remington MS280 Questions & Answers

0answers
0helpful
2answers

Replacement blades and screen for Remington MS280?

You will find blades and screens for model MS-280 at shaveroutlet.com. See link below

http://shaveroutlet.com/remington-sp69-ms2-series-foil-and-cutter-set-p-234.html
9/2/2012 3:31:35 PM • Remington MS280 • Answered on Sep 02, 2012
0helpful
1answer

The rubber water tight sealed

If you have had the unit for less than two years, it should be covered under the warranty. You can call Remington at 1-800-736-4648

You will not be able to obtain a replacemnt of the rubber part for model MS-280. To fix the shaver, your best alternative would be to purchase the replacement part below from shaveroutlet.com

http://shaveroutlet.com/shaver-replacement-parts/remington-ms280-lower-unit-p-846.html
1/10/2012 2:45:27 PM • Remington MS280 • Answered on Jan 10, 2012
0helpful
1answer

How to replace a battery in MS5200 Remington

You can have the battery replaced This needs to be done by an Authorized Service Dealer. To find your nearest dealer in the USA, use the online search function here:

http://www.remingtonproducts.com/ConsumerService/AuthorizedServiceDealers.aspx


If you are in another country, go to the top right of the screen, mouse over the Country and select your country. Look for a tab for the Authorized Service Dealer search function.
4/5/2011 9:05:10 AM • Remington MS280 • Answered on Apr 05, 2011
0helpful
1answer

How do we replace the

You will find instructions for replacing screens on model MS280 at shaveroutlet.com. See link below

http://shaveroutlet.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/i/file_21_9.jpg
1/24/2011 9:43:49 PM • Remington MS280 • Answered on Jan 24, 2011
0helpful
1answer

How do I remove old screen and head and replace

You will find the correct screens for model MS280 at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/remington-sp67-ms2-series-foil-screen-set-p-233.html

You will find installation instructions at the link below

http://shaveroutlet.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/i/file_23_2.jpg

If replacing the foils is difficult for you, you may want to consider ordering the foil and frame assembly. See link below

http://shaveroutlet.com/shaver-replacement-parts/remington-ms2280-ms2290-ms2390-head-assembly-p-391.html
1/3/2011 4:09:14 AM • Remington MS280 • Answered on Jan 03, 2011
0helpful
1answer

How do you replace the

10/25/2010 2:41:39 AM • Remington MS280 • Answered on Oct 25, 2010
0helpful
1answer

Hello, I have a Remington, Titanium, MS 280,

This 'cover' is not availble as a replacement part. In fact, NONE of the parts on the body of this shaver model are available as replacement parts. Only the foil, frame and cutters are available as replacement parts
Furthermore, this is a discontinued model. Replacing it with another MS-280 will be difficult. However, there is a similar model MS2-390 available from shaveroutlet.com. See link below

http://shaveroutlet.com/shavers/remington-ms2390-microscreen-500-shaver-p-564.html
10/10/2010 6:29:22 PM • Remington MS280 • Answered on Oct 10, 2010
0helpful
1answer

How do I remove the foils on my sp 69 shaver and

9/20/2010 10:28:11 PM • Remington MS280 • Answered on Sep 20, 2010
0helpful
1answer

How do I change the screens on my shaver

you will find instructional diagram for replacing screens on model MS-280 at shaveroutlet.com. See link below

http://shaveroutlet.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/i/file_23_2.jpg

If you need screens for your shaver, you will also find these at shaveroutlet.com. See link below

http://shaveroutlet.com/remington-sp67-ms2-series-foil-screen-set-p-233.html
9/14/2010 3:21:35 AM • Remington MS280 • Answered on Sep 14, 2010
0helpful
1answer

Plastic drive parts are worn

These can not be replaced but there is a very inexpensive solution at shaveroutlet.com. See lik below

http://shaveroutlet.com/remington-ms280-lower-unit-p-846.html
5/25/2010 1:17:52 AM • Remington MS280 • Answered on May 25, 2010
0helpful
1answer

Pop up cutter wont lock down and only one cutter

Same thing happened to me. I took it apart and got it fixed but then could not get it to lock down (wouldnt go down the whole way) There is a plastic that locks it down (if that is broken your out of luck)--and springs that pop it up. The key to getting it back in place is to push it down very evenly straight so that both of the metal rods go directly into each of their respective holes.
5/6/2010 6:15:44 PM • Remington MS280 • Answered on May 06, 2010
0helpful
1answer

Just got the replacement foils for the ms 280.

you will find removal and installation instructions at shaveroutlet.com or with the link below

http://shaveroutlet.com/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c230972d/f/i/file_21_9.jpg
1/16/2010 4:45:55 AM • Remington MS280 • Answered on Jan 16, 2010
0helpful
1answer

Remington shaver ms 280 screen has a hole

How do you replace (change) the screens on a Reminton MS-280?

"Paz"
Roger
7/10/2009 11:34:51 AM • Remington MS280 • Answered on Jul 10, 2009
Not finding what you are looking for?
Remington MS280 Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Remington Health & Beauty Experts

shaveroutlet.com
shaveroutlet.com

Level 3 Expert

1652 Answers

Gene Lawson

Level 2 Expert

53 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Remington Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Remington Health & Beauty

  • Remington Health & Beauty

Most Popular Question

remington titanium ms 280

  • Health & Beauty
Loading...