20 Most Recent Whirlpool GERC4110PS Kitchen Range - Page 4 Questions & Answers

Power failure.

Are the surface burners getting hot in normal time?

Replace switch for that burner

Replace switch controlling that burner.

Most likely a power supply problem. Sounds like you are only getting 120 volts to unit instead of 240.

Sorry there is no adjustment for that.

Check your main house breaker box and be sure breaker for Range hasn’t tripped there.

Oven door won't open or shut: There could be a problem in the door hinge. Sometimes it gets jammed after self clean cycle is over. Call our expert to handle this problem. Oven Repair Service in Los Angeles Same Day Repair 25 years of exp

You have done all the suggested corrections to clear this problem, you must have a faulty oven control panel.

You have a control panel failure.

No safe.

The burner is just a slave, your issue sounds like a controller matter. The burner cannot suddenly become hotter.

Nope that is not possible.

MMMMmmmm see this: eBay: $44.99 (OR BEST OFFER!) NEW 391847690458 $10 shipping Here is a USED panel, eBay ~ same price: Whirlpool AccuBake Oven Control Panel 8304270 8304243 eBay Whirlpool Accubake Oven Control Panel 8304270 8304243 NEW Anthony (Say Thank You!)

Think you have the wrong model number. Whirlpools model numbers seem to start with a "W"

bring it to the service near you , maybe the unit needs to reset the system

thermostat or try raising set point from 350 to 450 and monitor oven temp.

The clicking is the electronic igniter cycling.