http://www.fixya.com/support/p59786-jenn_air_jxt8136ads_kitchen_hoodSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 21 Aug 2008 00:46:10 GMT80http://www.fixya.com/support/t401639-cooker_hood_not_workingI have indesit cooker hood which i was using with light + fan in operation. All of a suuden whole thing stopped working , fuse/plug all ok - is there a fuse inside cooker hood that i cant see???Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t378764-bosch_extractor_fan_model_dke945dgbHi The extractor fan seems to work but its lost a lot of power. This type of model has three speeds by use of a sliding switch to increase the fan speed. The switch does not work. Just wondering if this is easily fixable by myself although not sure...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t386108-scratched_stainless_steel_sinkI just bought a stainless steel sink and haven't even used it yet even though it was installed a month an half ago. I need to finish the kitchen before I use any of the appliances. I had an electrician putting in recess lighting and I think he...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t491555-light_doesnt_work_kenmore_model_55022I have a Kenmore Elite model 55022 range hood that is about 2 years old. Recently both lights stopped working. So I did what any one would do went and bought 2 replacement bulbs. When I put the new bulbs in the lights still wouldn't work. So I...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t567392-fan_blades_or_motor_in_nucor_over_stoveResidential GE stove with an exhaust hood & fan above the stove. 18 years old. The fan blades have become bittle over the years and mostly broken. Is there someone who sells a replacement motor or blades (although it appears as if the blades are...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t624533-dacor_downdraft_ventremodeling kitchencan I change top piece from white to stainless steel? We just recently replaced our 30" white Dacor cooktop for a stainless steel. The countertop downdraft ventilation lid is in black, located behind the cooktop and would like to...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t929713-fire_cut_off_wiring_hood_lightsHow is this wired thru ansual systemThu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t500428-ge_motor_c474Hi, I've been asked to wire a ge two speed capacitor start/run motor mod. #5KCP49ZG104S. The problem is no wiring diagram. I was wondering if there is a typical wiring diagram that I can work from. ...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t562261-water_tank_noisereqire a tube to add to water inlet pipe to eliminate water falling soundThu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t642592-light_cover_zanussi_zhp_613_xI need to purchace a new light cover as i am missing one on my Range Hood. Can you help me!Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t685288-cooker_hood_problemHi One of the bulbs blew on my hood and it cut out. Have now replaced the bulb, reset it etc, but neither the lights or the fan will work. Any ideas?Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t761914-neff_cooker_hoodHave no manuel so do not know how to maintain and clean the filtersThu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t407596-whirl_pool_dryertrying to hook up power cord for whirlpool dryer 4 wire cord model # 3390415Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t179482-paintingCan I paint my kitchen hood?Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t224521-indesit_cooker_hoodI switched on light on cooker hood and then nothing would work. Both bulbs fused so changed bulbs but nothing is working now. Help!Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t242169-wind_comes_island_hoodOn windy cold days, I feel a draft coming through the hood, to the point that last winter I taped heavy plastic over the bottom and did not use it.Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t260853-oven_range_fan_its_own_circutI am installing a 30" island range hood fan and was wondering if I should run a single circut plug or if I can use the old plug that is on a shared circut?Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t372744-light_doesnt_work_kenmore_model_55022I have a Kenmore Elite model 55022 range hood that is about 2 years old. Recently both lights stopped working. So I did what any one would do went and bought 2 replacement bulbs. When I put the new bulbs in the lights still wouldn't work. So I...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t409479-lightbulb_dacor_hoodcan't figure out how to get the bulb outThu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t448002-indesit_cooker_hoodBulbs went on cooker hood, replaced but still don't work. Think fuse in hood has gone but unable to find teh fuse. Can you help.Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t788442-zephyr_savona_range_hood_only_speed_3Speed 1 and 2 of my Zephyr Savona ZSA-M90AS works. there was no incident like a spark or other--one day only the top speed (3) worked.Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t401190-lack_steam_removable_from_microwaveI boil water or soup and the front burner and the steam covers the door and goes towards the ceiling making my wallpaper come loose from wall. I need help badly this is a new stove and microwave. Yes they were installed just like the instuction book...Thu, 21 Aug 2008 00:46:10 GMThttp://www.fixya.com/support/t638412-indesit_hi161ix_positioning_above_cookerHello, My INDESIT HI161IX extractor hood has been delivered but without instructions. I need to know what's the minimal height above the oven it has to be positioned. Please help - many thanks! NicolaThu, 21 Aug 2008 00:46:10 GMT