Masterbuilt Turk-'N'-Surf's Turkey Fryer - Answered Questions & Fixed issues

https://www.manualslib.com/

Masterbuilt doesn't show this manual on their website anymore, but if you e-mail them, they will send it to you. They just sent me a copy this afternoon, and I put it online here: http://www.pdf-archive.com/2015/11/17/sedtfv-eng-070809/I'm not sure how long that website will host it, so if it's not there when you check, contact Masterbuilt directly.

Cook first!

You need a new thermocouple. Replacing it you fix your problem.

oil does not matter,any cooking oil will work, olive oil is the least desireable , you must have a good strong gas flow to your burner to get the oil temp correct

duplicate

The liquids in it act as a heat sink and prevent it from damaging itself All electrical appliances have a thermal cutoff to prevent fires. Replace it and try again next year. :)

www.masterbuilt.com model SEDTFV

www.masterbuilt.com model number SEDTFV

That is usually a problem with placing the heating unit into the bracket correctly. If is isn't put in properly the unit won't even power on. You may need to take it off and on several times to get it right.

You can get the fryer manual online at www.masterbuilt.com Model number SEDTFV.

Go to www.masterbuilt.com and you can download a manual there. Model number is SEDTFV

I start it as soon as I place the turkey in the oil. I always add about 5-10 min onto their suggested time though.

That is usually a problem with placing the heating unit into the bracket correctly. If is isn't put in properly the unit won't even power on. You may need to take it off and on several times to get it right.

Doubtful, it voids the warranty as soon as you open the housing and the wiring diagram isn't in the manual.

I was told they no longer make this part. I had the same problem.

That is usually a problem with placing the heating unit into the bracket correctly. If is isn't put in properly the unit won't even power on. You may need to take it off and on several times to get it right.

I was told they no longer make parts for this fryer. I had the same problem.

Same here. I was told they no longer make parts for this fryer.

I was told they do not make them anymore. I had the same problem.