http://www.fixya.com/support/p580749-emerson_v_series_fitters_viane_glass_eleSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 07 Sep 2008 12:30:50 GMT80http://www.fixya.com/support/t13727-removed_old_fan_light_3_wires_comingI removed the old fan & light. There are 3 wires coming out of the ceiling - white, black & red. The wires coming out of the new fan are white, black & blue. The fan is controlled by two switches - one on opposite sides of the room. The light is...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t13733-36_inch_ceiling_fan_four_wooden_bladesI have a 36 inch ceiling fan with four wooden blades. The thing always ran with a little wobble, but after it was taken down to repaint the ceiling and then reinstalled, BIG wobbles now. Im told the unit is of OK quality: The brand is "Homestead"....Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t101123-fan_problemwhines when turned on. seems to be either a grinding or a off-balance of blade and shaftSun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t376169-electrical_probleminstalled a carriage house 2. Light kit works, fan does not. took apart, investigated... white electrical connector between fan and light kit sparks blue... fan runs. wiggle some more, fan stops, wiggle some more, connector "lights up" fan starts......Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t384485-snowthrower_stay_runningwhen priming it leaks gas and hard to start and won't stay runningSun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t391073-purchased_hap_726_2_7_08_holmes_truehepa3 days later the unit is not working? i've checked to make sure everything is seeded properly, nothing. all light functions are working...timer doesn't seem to work either?????Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t414209-casablanca_w32_fan_light_switch_reversedI installed a new W32 wall controller for a Casablanca fan and the Fan and Light switches are reversed. When I swap the black wires with white stripes as described in the installation manual, the switch is totally dead and does nothing. When I swap...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t488105-broken_globe_hampton_bay_ceiling_fanI have a broken globe on the light fixture of a Hampton Bay Ceiling Fan(Vercelli model HD 278017). How can I get a new one or are there compatible light fixture kits available for this model?Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t656363-fan_switch_broken_wires_out_when_openedThe fan stopped working on my Hampton Bay Carriage House II fan/light. When I took the fan apart, the fan switch was cracked and wires were already pulled out. I purchased a replacement fan switch from home depot but don't know what wire to put...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t720875-huntington_bay_ceiling_fan_w_lightsnothing will come on. It worked fine the night befor but now nothing works. I put a new battery in the remote & still nothing. I have power to the wall switch. The fan is less than one yr. old.Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t830579-ceiling_fan_only_spins_1_speedMy daughter's ceiling fan used to work fine. I tried to put it on today & it is only spinning 1 speed, instead of the 3 it used to have. Any ideas on what may be wrong, or how to fix.Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t847409-casa_blanca_fan_motor_speed_controli have an older casa blanca fan with pot for fan speed.what can i replace the speed control assembly with.Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t854813-heritge_ceiling_fanI have bought from a friend a heritage ceiling fan but he has misplaced the plate that attaches to the shaft a the ceiling fan, and also to the ceiling. It helps the fan rotate on a even scale. How can I get just the plate I need. The model is #...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t873257-harbor_breeze_ceiling_fanI installed a new ceiling fan 2 months ago. 1 month ago it started running very slow the capacitor was fried. I then got a replacement fan and within 2 hours the fan slowed down and the capacitor was extremely hot. what could the problem be?Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t792425-casa_vieja_fanI need a fly wheel for a Casa Vieja Lexington fan. Where can I find one?Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t907421-wireing_bathroom_extractor_fan_three3 switches one for landing light, one bathroom light, one for extractor fan. This is all in one, the first two work o'k but I cannot get the extractor fan to switch on.Do the three have a comon live connection or do you need a separate live conection...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t914219-fans_spinning_opposite_directionsBuilt a custom home and had two Minka Aire F705-TSP installed in 24 foot ceilings. After one month, the syncronized fans began spinning opposite direction. Electrician had to come out w/ scaffolding to get to spin back in same direction. Two months...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t932758-ceiling_fan_chain_brokehertiage hugger ceiling fanSun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t726424-electrical_questionhow many recepticals (plugs) can i put on a 15 amp circuitSun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t744022-motor_fan_feels_hotI took apart two fans today to clean them. I noticed no problem withe Pelonis fan (both on stands), but the housing for the motor on the WindChaser fan was pretty warm to the touch. In this weather, both of them run nearly 24/7. My question is this:...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t518128-fanMy fan takes about ten minutes to start turning once switched on. I can hear a whiring at the motor, but any assistance by moving the blade does not help.It is like a resistance which it has to overcome. It was OK when first bought but after 2 years...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t588010-query_electronic_safeHi, I have a Lexsor electronic safe which I can't open. It used to beep when I put in the code now it is just dead, nothing happeing. Do you know if there is a battery replacement somewhere. Thanks. LucySun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t479164-wiring_ceiling_fan_remote_sensorI am replacing a existing ceiling fan in our living room with a Hunter 101264, comes with remote. Connected the wires from the ceiling to the sensor black to black, white to white, grounds, but it does not say what to do with the red wire coming from...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t449686-redington_iv_hampton_bay_ceiling_fanWe installed our ceiling fan and turned the lights on only to find that the fan works but not the lights. We also have no idea where the receiver for the remote goes!!! Please help.Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t288286-fan_partneed to find a replacement globe for hunter fan model 25706. no longer available at hunter.Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t299272-outdoor_outletOur outside oulet which our minimal christmas lights are plugged into, stopped working.? I tried to reset all of the breakers, and there is no BFI button that appears to control it.? The house is about a year and a half old.? Any ideas before I call...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t13732-am_trying_wire_2_additional_3_wayI am trying to wire 2 additional 3-way switches on opposite walls so I can control the fan and light separately. I was able to get fan to work but unable to get both to work. Any ideas?Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t318430-holmes_hasf_99_10_inch_velocity_blizzardHi there! We have Holmes HASF-9 10 inch Velocity Blizzard Stand Fan. One of my son's birthday balloons got sucked into it and the streamer ribbons is wrapped around the blades and motor. We can find no way of getting the front or back off to remove...Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t356002-hampton_fanI am installing a hampton fan and cannot figure out how to mount the cover to the ceiling? It has screws along the outer edge but nothing on the ceiling to screw it into. I bought the display so I may be missing a part?Sun, 07 Sep 2008 12:30:50 GMThttp://www.fixya.com/support/t362890-ceiling_fan_light_works_wall_switch_butI have a second hand Hunter fan with no instructions. I have a black, white and red wire in the ceiling box. I connected the fans wires in this way: black/white stripe to white supply, white to red supply, and black to black supply. The light works...Sun, 07 Sep 2008 12:30:50 GMT