20 Most Recent IBM eserver xSeries 360 8686 Questions & Answers


I do not understand your question, please be more specific

If you need further help, I’m available over the phone at https://www.6ya.com/expert/conrad_31509e768082a712

IBM eserver... | Answered on Jan 20, 2018


No, the motherboard in that server has only PCI-X connectors. You can install PCI video cards on them but they are very basic.
This one should do
http://www.newegg.com/Product/Product.aspx?Item=N82E16814187057

IBM eserver... | Answered on Sep 15, 2010


dear mugkifa ,

NMI ISSUED PRESS ESC TO TURN OFF NMI IN IBM SERVER

the above error indicates , a non maskable interrupt occurred in your server , there may be a change of malfunction of a hardware ,like add on cards

one more solution in ibm server is disablig the NMI interrupt by using jumper settings (inside motherboard)


see the below mentioned details , may differ with your server series please refer with series on http://www-947.ibm.com/support/entry/portal/docdisplay?brandind=5000008&lndocid=MIGR-5069937

System-board jumpers
The following illustration shows the switches and jumpers on the system board:
migr-5069937_2.gif Note: Any jumper blocks on the system board that are not shown in the illustration are reserved. The following table describes the function of each jumper block:
Jumper Settings CMOS jumper (JP3) Pins 1 and 2: Keep CMOS data (default)
Pins 2 and 3: Clear the CMOS data, which clears the power-on password and administrator password Boot block jumper (JP4) Pins 1 and 2: Normal (default)
Pins 2 and 3: Recover boot block NMI (non-maskable interrupt) switch (SW1) Normal (default): No NMI issued
The NMI button that is on the rear of server, connected to this switch, has been pressed: NMI issued

IBM eserver... | Answered on Aug 11, 2010


Whatever is in slot 02 in your PC is faulty.

IBM eserver... | Answered on Feb 08, 2010


Um... It told you. Press the Escape key.

IBM eserver... | Answered on Jan 11, 2010


It is not detecting the HDD because the windows install does not have the necessary drivers. On the windwos install you must press F6 or F2 I don't remember which one but it prompts you for them to load external drivers fro SCSI or other type of drives, you must download the right drivers for the type of HDD the server has probably fromt eh IBM support website, put them in a floppy and load them from the floppy into the windows install so it recognizes the drives..

IBM eserver... | Answered on Jun 02, 2009


IBM Serverguide will most likely get you going again. Go this link:
http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=SERV-GUIDE&brandind=5000008. You can download the ISO image for the version of Serverguide that will let you configure your system. If you have a Xseries 360 version 7.2.03 should work.

I hope this helps. Good luck!

-jodair

IBM eserver... | Answered on Apr 06, 2009


If users try to send more than the maximum allowed data, Domino returns an error

read this red books reference, i hope this might help you.

http://www.redbooks.ibm.com/redbooks/pdfs/sg246495.pdf

http://www.redbooks.ibm.com/redpapers/pdfs/redp3851.pdf

IBM eserver... | Answered on Mar 23, 2009

Not finding what you are looking for?
IBM eserver xSeries 360 8686 Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2679 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

xSeries IBM

  • xSeries IBM

Most Popular Question

planar pci device not respond or disbale

  • Computers & Internet
Loading...