20 Most Recent Belkin (F5D7633UK4A) Wireless Router - Page 6 Questions & Answers

• bypass router check for connection
• if none call ISP
• if yes, call belkin support
  

1. Hard wire your pc to the router/modem using ethernet cord / cat 5 cable or use usb storage to download the driver to this link

http://web.belkin.com/support/article/?lid=en&pid=F5D7050&aid=5381&scid=0

2. Install the driver/software by executing the file.

then follow this:

SymptomNot able to go online only with the wireless connection.
ResolutionTo address the problem, use the following steps:

1. On the Belkin Wireless monitor utility click on the tab AP List .
2. Select the encrypted network that you wish to join. Click Connect.
3. This will take you to the New Profile page . Enter a Profile Name .
4. On the next page, you will see the network name, the network type and the transmit rate. Click Next.
5. This will take you to the page that will ask you to select the Authentication Mode. This will be OFF by default. Select Open System or Shared Key depending on the network.
6. Then select 64-bit or 128-bit encryption depending on the configuration on the Router/AP. Click Next.
7. On the next page, select Input Method , which will be Hexadecimal (0-9,A-F) or Passphrase.
8. Select the key index and enter the keys or the passphrase depending on the configuration on the router/AP. Click Complete.

CauseYou are not able to connect to a secured wireless network because the router/AP (what is this?) is encrypted.
SummaryWireless networks by their very nature are not secure because data is transmitted across open (i.e., air) media. This allows unintended “listeners” to receive the data. WEP (Wired Equivalent Privacy) is used in a wireless network to secure the signals and hence the data.

Unplug your router. Unplug your modem. Wait 30 seconds. Plug your router back in and wait 30 seconds. Plug your modem back in and wait 30 seconds. Go to network connections under control panel. Right click on your network node. Enter enable. Wait a few moments and your network should come up.

No router needs a setup CD to configure.

Configure DHCP on your MAC interface that connects to the router and check if that interface gets an IP. If you have an IP, then open a web browser (IE, Firefox, etc, forgot the MAC browser name), and enter the IP address you had but replace the last one with 1.
Say you got 192.168.2.3, then enter 192.168.2.1 and hit return.
You will need a pasword to login. If you ever changed router password, it will be either blank (type nothing) or admin.

After login, you can configure anything list on left side of the menu.

My MTU is at 1500 and I get the same message. I don't think XBL is up yet.

XBox Live is down today June 16th, 2009. It'll be down until either late tonight or early tomorrow. There is maintenance being done on the servers.

Open internet explorer click on tools then click on internet options.click on delete cookies and then click on delete files.check the box which shows delete offline files.then click on clear history. Then click on the tab "content" then click on clear ssl state then click on autocomplete and click on clear forms and clear passwords then click ok Then click on "Advanced" tab and then clcik on restore defaults. then click on apply and then click on cloce. Now close the internet explorer and reopen it try to open the email and check

In the router go into WAN Interface or something similar to that menu choice. Click on Connection settings area and just click through until you see the MTU settings. Don't forget to apply changes after changing it. I hope that helped.

You can usually erase WEP keys off of a wireless router by doing a full reset. This usually involves holding the reset button for up to a minute and turning the router on and off. The method varies from router to router.

You can sometimes find this information in the user manual. If you post the model of the router I may be able to tell you what you need to do to reset it.

Make sure port 443 is being forwarded in the port-forwarding settings.

Belkin dosent seem to have your model (anymore??)
But here is the link to contact them:
http://www.belkin.com/support/contact/email/technicalsupport/
Bye the way, I WOULD NOT install the wireless software on a wireless pc, as configuring a Router with a wireless conection is bound to create problems, - take it from someone who KNOWS.

HI
First you need to access your Router.
Then go to the setup page and set the router password and the encryption which is in your case WEP.

To do that open an Internet page and then type in your router's IP add, then type in username and password.

then go to setup page and change anything you want.

Hope it helps

Cheers

Click here for the step by step procedure in setting up port forwarding on a Belkin router.
and I believe this link here will also be halpful for you setting up shareaza behind a router/firewall.

Normally for routers or gateways you can check the actual model number on the device itself for UK devices usually they will affix letter A or B next to the model number to indicate which region it belongs. Open region routers and gateways are compatible with region A locations but not with region B.

no you cannot have 2 modem/routers, only another router

when you upgraded did any settings from your isp change like passwords or usenames that your router may not be registering at your isp's server, or the line speed that you are now getting is not suported by the router.

 

type 192.168.2.1 in your web browser and check the connection settings. 

The WEP code is whatever you make it when you set up the wireless connection. If you have lost this key. It is best to use the manual reset located on your wireless router. Will require a small point like a paperclip. Then you will have to access the router and set up the wireless internet over again. Then you can secure it with a new WEP key.
If you need further assistance please ask me.
Thanks,
Lee

Consider using OpenDNS. You can find it at https://www.opendns.com/
It's nameservers are: 208.67.222.222 and 208.67.220.220.

I'll skip the details why they are hundreds of times better than your ISP's nameservers, but they list the reasons on their site. Give it a try and see if it will work.

hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

if you are still having trouble configuring your device, call supportrix and use supportcall as your promo code for 1 free technical support.

I suggest you write your question as a normal English sentence to start with. More of us might be able to then help you.