2-15Hardware SetupThe mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, USBPorts and CPU/System FAN.Floppy Disk Drive Connector: FDD1The mainboard provides a standard floppy disk drive connector that supports 360K,720K, 1.2M, 1.44M and 2.88M floppy disk types.ConnectorsFDD1Fan Power Connectors: CPUFA1/SYSFA1The CPUFA1 (processor fan) and SYSFA1 (system fan) support system cooling fanwith +12V. It supports three-pin head connector. When connecting the wire to theconnectors, always take note that the red wire is the positive and should be con-nected to the +12V, the black wire is Ground and should be connected to GND. If themainboard has a System Hardware Monitor chipset on-board, you must use a spe-cially designed fan with speed sensor to take advantage of the CPU fan control.MSI Reminds You...1. Always consult the vendors for proper CPU cooling fan.2. CPUFA1 supports the fan control. You can install the PC Alert utilitythat will automatically control the CPU fan speed according to theactual CPU temperature.CPUFA1SENSOR+12VGNDSYSFA1SENSOR+12VGND
Guru