20 Most Recent
Weber Genesis Gold B Grill Questions & Answers
Clogged burner
you could put it in CLR or clean the holes on the burner with some wire and poke them out or blowit out with a air line .
The electric igniter in my
Call Weber grill up and tell them you have this problem they will send it to you free most of the time!
Flames on burners not at full flame
Hope you get this in time for your 4th of July Cookout.
1. Turn the tank valve OFF and disconnect the hose from the tank.
2. Wait 5 minutes and reconnect the hose to the tank.
3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow).
4. Once the valve is fully open, light the burner farthest from the tank first & turn it to HIGH.
Did the burner light and the fa,e height look correct? If so, light the remaining burner exactly
the same way. Now, do all the flame heights look correct? If so, you solved the problem.
Always remember to turn the tank valve ON Very, Very Slowly.
If
the above didn't solve the problem, you will need to replace the
grill's Hose/Regulator Assembly, as the regulator is locked up. You can
pick one up from any home center or hardware store that sell grills and
accessories for about $30.00. Take your old one with you for
comparison purposes.
I hope this helped you troubleshoot and solve the problem, Please let me know and Happy Grilling!!
Front Burners very low back burners not working
Front 2 burners light properly but back burner does not light.
Checked cleaned spider guards, even removed the burner making certain it was clean. Reassembled the back burner but it still does not light.
The infrared does not seem to be working
If you don't hear gas, it could be the regulator and hose on an LP grill, or the regulator on a NG grill. Replacing them is fairly easy and inexpensive. It could also be a blockage, but you have to take the grill apart to check each valve for a blockage. If you do not hear gas at any of the valves, try the regulators first.
Self ignite won't work
If the electrode (the ceramic piece with small wire in the center or the metal plate just above it become dirtu or greasy it will not spark. Clean the electode and plate, let dry and try again. You may also need to position the plate closer to the electode tip to get a spark
Where can i get a kit or info to change a genesis
Give their customer service department a call at 1-800-446-1071 and they'll be able to tell you if the conversion kit is available for that specific grill. If the grill is old, there may not be a kit. In that instance, you could simply purchase a new grill, or try one of the specialty grill shops that sells replacement parts.
Low flame with tank full
try opening the tank really slowly and see if this helps. there is an overfill protection devise in the tank and if it is opened too quickly it will restrict the gas flow to the burners. hope this helps.
Proper cleaning of grill and grates
ok here is how i do it.remove the racks and biskets take a garden hose and remove all dust from top and lower gril. let it dry, Then I go to the dollar gen store and buy 2 cans of easy off oven cleaner. spray inside the grill top and lower part. let it set 1 hour. if you have a presure washer it will be great, but a garden hose will do just fine. wash the outside last.
And PLEASE WEAR GLASSES WHEN DOING THIS JOB. TAKE CARE OF YOUR EYES! hope this will be of some help. my Dad told me how to do it God rest his sole.
Not finding what you are looking for?