20 Most Recent GE DCVH515EFWW Electric Dryer Questions & Answers

what's the brand name of the dryer and open the door look around the opening where you put the clothes in and send the full model number

& if your not sure get a service tech so you dont do more damage

EEPROM failure you need a control board

Models covered in this error code table : DBVH512 DCVH515 DHDVH52 EEPROM is in the control board. Here is the part number WE4M385 Here are instructions to replace it.

belt needs replaced I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102

G.E. part# WE16M15 blower wheel

Instructions 1 Remove the lint screen from the GE electric clothes dryer. 2 Roll the lint from the screen with your hand. If the lint screen is clogged with fabric softener, fill a sink with hot water and add 1 to 2 tsp. dish soap. 3 Scrub the lint screen with a soft-bristle brush and soapy water. Rinse the lint screen thoroughly and shake off any excess water. Set the lint screen aside to air dry while you clean the dryer exterior. 4 Dampen a cloth with warm water and wring it out. Wipe over the GE electric dryer exterior to remove any lint, dust or product residue. If the dryer is very dirty, dip the cloth in the soapy water and wipe away any spots. 5 Wipe the GE clothes dryer with a towel to dry. Replace the lint screen when it's completely dry.

Here are some videos for the belt replacement.

The only thing I can think of is if you have plastic inserts built into the drum then maybe you installed the wrong kit in the dryer.Their are basically 2 styles of GE dryers. Those that have a steel drum and a bearing with glides on the front panel and those that have felt on the front panel and the plastic glides mounted in the drum itself. If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

In short yes if there is no obstruction around the fan.

GE dryer repair If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61