20 Most Recent BenQ PB6100-REMOTE Questions & Answers

Sir, I am asking of Benq Model no - v42p of factory reset service code.

Hi,

Before purchasing any remote control I would make sure that the projector is reacting properly to the front panel buttons on the projector, to confirm that it is not related to a different problem.If it is responding to the front panel buttons, this would confirm a faulty remote and needs replace. In case, if the front panel buttons are not responding, then this is an internal fault and needs repair.


Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

The input changed, ensure to look at the input, video, or channel three selection to determine which one was accidently changed. Once you fix this problem, you will be able to see channels again. It happens to me almost every day with the same unit!!! Sometimes turning power off then back on will fix the problem.

Hi,
I think you have lost your precious Remote because you don't do it by yourself if you have not any experience about electronics. You made a mistake to wash it out with alcohol and i think you didn't give time to dry it.And moisture was still there and you you connect batteries with it too.That's why you feel hot.It means that a short circuit has been occurred in it.My advise is to contact any expert nearby to you and avoid any new experiment on it.It can be repaired yet.
Thanks.

Question edited for clarity and typos. " I tried the codes that ***you*** supplied " We didn't supply any codes. We are FIXYA, we aren't Benq. The password is there to help prevent these projectors being stolen. I would be sceptical where the seller got it from. This what Benq say. "Take to to a Service Centre". I forgot the password, is there any way to unlock the projector? 04-07-2020 Due to security concern, it is designed as not possible to unlock the projector if the password is forgotten. The only way is to return the projector to service center for resetting.

The green temp light indicates that the fan isn't working; some models have 2 fans. The fan cools the projector lamp and protects the unit from damage. When the fan isn't working, the projector turns off to keep the temperature from continuing to rise. This information is available on page 52 of the User Manual available here: https://www.benq.com/en-us/support/downloads-faq/products/projector/w1080st/manual.html . The current link to the manual is https://esupportdownload.benq.com/esupport/Projector/UserManual/Projector_um_User%20Manual_20130529_114725W1070_W1080ST_EN.pdf . The recommended solution is a service call. If your projector is out of warranty and not covered by a repair plan, I found several sources for the replacement fan with a Google search. IFixit has some videos for taking apart the projector to clean it and replace the fan on some BenQ projectors. I hope this helps. Cindy Wells

no monitor model told. sony play station 5, lines seem to me , impact damage to monitor bezel edge! to the OSD monitor menu button screens work ok? buttion on MOn. I guess HDMI connected and no PC with HDMI? to try Does the monitor have 1 ,2 or 2, inputs? dvd/hdmi,dp, if yes it can be tested on most PCs. a PS5 can overheat and do that, does it have full venting? not stuck in a hot cabinet. ? try reconnecting both ends of HDMI cable>? make sure pins on ends not damaged? eyeballed. this monitor 12years old or older( no model told off tag on rear)? good luck best test of all is on a PC. got one?

Sounds like the DLP chip has failed. You can get replacement parts here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Replace the main board if the power supply voltages are ok.

Without a remote control, you can't. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. http://homenol.blogspot.com/ http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Circuit diagrams of SMPS section of many popular brand devices are given. Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.