20 Most Recent
DISH Network IR Remote Control - Page 9 Questions & Answers
Dish IR Remote 20.0 has problems after sunset.
The problem for me was the TV giving off IR signals that interfered with DISH's poorly designed remote. When the TV's room ambient light sensor was turned on and it became dusk outside the DISH remote would stop working. Moving the receiver away from the TV helps but the problem is not eliminated until the light sensor is turned off.
Until DISH corrects this poor design there may be no other viable solution.
Codigos television panasonic
Para que su control
funcione con su TV, el control tiene que ser programado a la TV. Tendra que
hacer lo siguiente: Siga este vinculo,
http://www.mydish.com/support/apps/remotecodes.aspx
seleccione el modelo de control (este se encuentra en la parte de atras del control) Una vez
usted haga esto, seleccione el tipo de aparato al cual necesita programarlo (en
su caso es TV) Y despues la marca de la TV. Una vez usted haga esto le
aparecesaran los codigos que posiblemente funcionan con su TV. El procedimiento a programar su control es el siguiente
Oprima el boton de T.V localizado en la parte de arriba en su control por 5
segundos, despues cuando vea que los botones de arriba se iluminan ingrese un
codigo seguido por el signo de numero por ejemplo: 685#. El boton de t.v debe
de iluminarce 3 veces, despues de esto puede intentar apagar el televisor,
deberia funcionar.Si necesita asistencia adicional por favor dejeme saber a:
[email protected] EscobarSocial Media RepresentativeDISH L.L.C
Necesito el codigo para sincronizar
Hola mi nombre es Kimberly Escobar con DISH Network. Con mucho gusto le puedo proveer la informacion que necesita. Ciertos codigos que se pueden integrar al control para que funcione con su television Element serian 627 and 659. el procedimiento a programarlo seria precionar el boton de T.V localisado en la parte de arriva hasta que los demas botones se prendan en rojo, una vez esto suceda ingrese uno de los codigos seguido por el signo de numero por ejemplo 627#. El boton de T.V debera iluminar en rojo 3 veces. Despues de este procedimiento puede intentar usar el control, no le podemos prometer que controle totalmente su T.V. En este link puede encontrar mas codigos y ayuda programando su control
http://www.dishnetwork.com/SupportSection/remote-setup. Si necesita mas ayuda o tiene mas preguntas pro favor contactenos directamente al 1800-333-DISH, gracias y espero esto le sirva de ayuda!
Ir remote for the vip722k does not work in dim
Hi Wayde, my name is Kimberly and I form part of the Social Media Department with DISH. I am sorry to hear you are having issue with your remote. It seems like it could be interference with your Tv or another equipment in the same room. For this issue to be resolved you will need to convert the remote to UHF or obtain a new remote that is UHF. If you would like me to look into this for you or need a new remote feel free to contact me directly at:
[email protected] Kimberly.EscobarSocial Media RepresentativeDISH L.L.C
How can i make it possible to watch different channels on 2 t.v.
Daneal,To watch 2 TVs on different channels, you would need at least a duo receiver. Our duo receivers have two tuners built into them, and just need the proper connections to broadcast individual programming to two locations.Just make sure the duo receiver is in dual mode. Let me know if you have any questions!Tommy FaustDISH Social Media Representative
Not finding what you are looking for?