I don't have my manual and I have a new tv, how do i program my remote to work on the new tv??
Posted by healyz on
Hold button down for unit you want to program. (TV,DVD,VCR) Then hold down on off button at same time. On/off button will turn off then come back on. When this happens push the play button. Wait 10 seconds and then push again. Repeat until unit turns off. Once unit turns off push rewind button one at a time until unit turns back on then push the stop button.
Posted on Oct 15, 2008
I have the RCA RCR311W remote, I was using the remote for my JVC TV. For whatever reason it stopped operating the TV. I cannot find my code list and have been unable to find the code list on the internet to reprogra the remote. Can you please help??
Posted by mari220 on
1) turn on unit
2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up
3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.
4) release both buttons. On/Off should stay on.
5) Press On/Off repeatedly until unit turns off.
6) Press the Stop key at bottom.
7) light goes off. Remote is programmed!
Posted on Jan 24, 2008
OP MANUAL LOST WOULD LIKE THE CODES RELATED TO MY MODLE AS WELL AS INSTRUCTIONS TO MANUALLY ENTER THE CODE
MY MODLE IS A SANSUI
Posted by CHAMPAGNE on
I lost the remote to my Sansui TV and can't remember the model number. can I get a remote to replace it?, the tv was bought in 2004
Posted on Jan 05, 2010
i have direct tv and bought sony tv how do i program remote to tv
Posted by luvbird on
I have an RCA rcr311w universal remote which changes tv channels fine. However, I cannot find how to change the channel to watch a dvd or my camcorder. I cannot see the menu for the dvd player/recorder because I can't get the tv to this channel. With my old remote, I pressed the Input Key. On this remote, the Input Key only changes the tv up and down one channel. How do I get to the Video 1 or Video 2 so that I can see my dvd menu?
Posted by sherrijing... on
my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.
Posted on Apr 05, 2008
I need the code for a Toshiba TV can you help me?
Posted by kihara on
Try these codes:
1000, 1048, 1072, 1105, 1109, 1118, 1160, 1190, 1241
Posted on Jun 11, 2008
Will you please send me the link for the "Code Lists" for the RCA universal remote control model # RCR311B. I downloaded the user manual , but apparently there is also a "Code List" which is seperate from the manual. I have looked online forever now, and can't find the "Code List". PLEASE HELP
Posted by sheri714 on
Select your remote model RCR311B from the pull-down list, then select the device your want to program, then select the brand and it will give you the codes....
Posted on Jul 22, 2008
I have lost the codes for the RCA RCR311B remote control for the Sanyo TV set If you have them I would be greatful
Posted by picksee on
Codes For Model RCR311B
Code 1004 for Sanyo TV Code 1048 for Sanyo TV Code 1049 for Sanyo TV Code 1073 for Sanyo TV Code 1080 for Sanyo TV Code 1162 for Sanyo TV Code 1169 for Sanyo TV Code 1180 for Sanyo TV
Codes found here: http://remotefinder.rca.com/default.aspx?site=rca
RCR311B manual (PDF): http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr311-manual.zip&area=other
Posted on May 26, 2009
can not get visionquest tv to program no code, tried auto and then NEC codes
Posted by jdressing on
1006, 1007, 1049, 1012, 1051, 1052, 1061, 1072, 1157, 1190, 1194, 1231, 1233.
Posted on Oct 17, 2009
454 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: