Nationwide | 859-609-2887
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQU... Read More
Problems with NEC for VT Series 50" Projector Screen?
Troubleshooting and Support
Click here to get instant support from our best Experts!
NEC for VT Series 50" Projector Screen Manuals & Guides
Click here to get instant support from our best Experts!
Upload Manuals
Tips & How To Guides for the NEC for VT Series 50" Projector Screen
Mitsubishi Green Blinking light of death
This information applies to Mitsubishi sets that have a Model number beginning with VS, WS, WT etc. It does not apply to the WD series of sets made...
written by SD Tech
RCA, CRT Projection TV, ITC222 chassis Faults - models D52W.., D40W..,...
RCA, CRT Projection TV, ITC222 chassis Faults - models D52W.., D40W.., D56W.., D61W.. · Symptom: No Convergence, Picture is bowed and distorted,...
written by johnnydiode
Samsung Color Wheel replacement!
This varies a little depending on model number of the set. Usually a bad color wheel will produce a high pitched sound or even a grinding noise; some...
written by SD Tech
Sony KP51hw40 etc with Blue screen and or Shuts down
Many of these sets had problems with bad picture Tubes--they use a red, green and blue crt. Most commonly the blue gives troubles--The tubes are now...
written by SD Tech
Mitusbishi shuts off instantly...
Most of the Mitsubishi rear projection sets made from about 2000 through 2006 have a self diagnostic check feature. It will indicate if there is a...
written by SD Tech
PANASONIC CONVERGENCE DO IT YOURSELF REPAIR
So many people ask me about this here are my Instructions if convergence will not adjust and or is skewed:
PANASONIC CONVERGENCE...
written by SD Tech
Solution for Video looking whiteish, dull, or too red
Here are some of the most common symptoms and examples of a convergence problem. This is a very common failure on Projection TV sets. Screen looks 3D...
written by Ecollier2012
Why my TV does not start up and remains in standby?
Try first leaving the TV power cord unplugged for some times, let say one hour or so. Also
ensure that the fault is not coming from a faulty receiver...
written by ginko
Click here to get instant support from our best Experts!
Top Repair Providers for NEC for VT Series 50" Projector Screen
Find a Warranty
Specifications for NEC for VT Series 50" Projector Screen
Key Features
Dimensions
NEC Contact Information
Main support number1-800-338-9549
Best Projection Televisions
Recommended by Owners
Recommended by Owners
Top Projection... Experts
