20 Most Recent Whirlpool Gold White-on-White 21.9 cu. ft. Conquest Side-By-Side Refrigerator with Ice and Water GD2SHAXLQ Side by Side Refrigerator - Page 4 Questions & Answers

I'm not sure what would be the best way to fix it, but for now turn the water off so the ice quites overflowing.

is the water valve open at the connection?

Sounds like the unit may be stuck in to defrost . The defrost clock is usually inside of the refrigerator compartment up by the thermostat controls. you can take a screw driver and advance the controller to make the compressor come back on . usually when they start to stick they neeed replacing. good luck and please don't forget to rate the answer please. Thanks for using FixYa.

if you hold the button in for three or five seconds and it doesn't respond you are out of luck,i looked up your model and the board you need is no longer available.if you go here and look at part number 23 and it's like 120 dollars they make you buy everything in the picture instead of getting the parts separately http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Refrigerator-Parts/Model-GD2SHAXLQ00/1198/0165000/W0205059/00008?blt=06&prst=&shdMod=

Hello, dfI am trying to help you out here. Maybe this will help some? I am know on Fixya as the cleanup expert pro. Which means I spend my own personal time to seek out customers that maybe have not had there problem yet solved. I do this on my own for free. Think of me as a Specialized Trouble Shooter.I have found out that it appears that lots of customers appreciate my efforts and help. So, I thought I would take some of my own personal time to see if I can help you. Even though this Informational site may not have your exact model or brand, But this site will help you a lot. Here is the site link about everything you want to know about refrigerator and possibly yours, from repair to trouble shooting it.http://home.howstuffworks.com/how-to-repair-a-refrigerator.htmPlease if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help, I would appreciate it. Like I said I just try to help, If anything this is good information for future problems. If you felt that my free help was a waist of time for you, I'm sorry. I do not get paid to help people on the site, I do it cause I like to help and maybe make a smile on someones face.Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help. http://beta.fixya.com/users/mc1bean

oowwwww!!! thats what we call in the refrig biz "refrig cancer" the door itself is actually rusting from the inside out. the older refrigs used fiberglass insulation inside the doors which has a tendency to hold moisture, and overthe years rusts through. the new door use blown-in poly styrene foam far less likey to hold moisture. That being said you could remove the door lightly sand and paint, can of krylon enamal aint should do it, at least for a little while anyway

most likely it will be the defrost thermostat,you also have a timer down at the bottom right side i think where the condenser coil is.that also can be bad.it would be a good idea to change out the t-stat anyway so if your meter isn't working you can unplug the machine,cut the two wires going to the t-stat,wire them together,turn your timer to defrost with a regular screw driver,stick the driver blade into the middle of timer or you can turn this one by hand,turn it until the timer clicks and the evap fan motor stops,if the heater comes on you have a bad t-stat.call your local parts store,give them the model number and they will give you the part number.