I know the Display is working because the camera setting show up, but point the camera at a person...
(More)
I know the Display is working because the camera setting show up, but point the camera at a person to take picture and the display is blank/black... person does not show up on display. I took the picture any way and when I review the pictures, they are black...no person. I tried to reset default settings. That did not work. Any ideas?
I have a problem with Canon SD850 in zoom mode and low light. Outside in less than sunny weather, if...
(More)
I have a problem with Canon SD850 in zoom mode and low light. Outside in less than sunny weather, if I zoom on a subject the LCD gets really dark (almost black) when I compose a picture. Picture will come out just like LCD.
Dropped camera - getting "Lens error, restart camera" message. Everything seems to be...
(More)
Dropped camera - getting "Lens error, restart camera" message. Everything seems to be intact. Local camera shop says the part alone is $150 and better off buying a new camera. Love the camera and don't want to get a new one. Canon PowerShot SD850IS
Roxio software says I need a firewire 1394 cable to transfer video. Is that different from the cable...
(More)
Roxio software says I need a firewire 1394 cable to transfer video. Is that different from the cable supplied with my Canon SD 850 IS?
My review button doesn't work. When I set my camera to the review button setting the screen says...
(More)
My review button doesn't work. When I set my camera to the review button setting the screen says Auto and when I change it to the Auto setting it still says Auto.
i loaded software onto computer (Windows XP SP2) and hooked up camera but it wouldn't recognize the...
(More)
i loaded software onto computer (Windows XP SP2) and hooked up camera but it wouldn't recognize the camera. it said "new hardware found" but took me to the new hardware wizard, looked for some files from disk and then gave me a "cyclic redundancy check" error. I thought that i was missing the driver (though I shouldn't be missing it with XP) and I couldn't even find it on the disk to manually install. little help? thanks.
The display in any mode shows only a some a couple vertical and horizontal lines, a grey rectangle...
(More)
The display in any mode shows only a some a couple vertical and horizontal lines, a grey rectangle and a black rectangle. The camera DISP button changes only the intensity of this image if I hold it down for a couple of seconds. I can still take pictures by looking through the view finder and transferring them to my computer. However, I'm pretty much restricted to using AUTO mode, since I can't see changes to any settings. I'm not sure if the problem has to do with moisture, since it cropped up suddenly on a foggy day, but the problem has not gone away with time, nor has it been intermittent.
One of my kids dropped the camera while the lense was open. When we tried to turn off camera, lense...
(More)
One of my kids dropped the camera while the lense was open. When we tried to turn off camera, lense wouldn't retract and we noticed the smallest part of the lense was kinked / pushed in on one side. We gently pulled it out to make it flush but the camera would still not retract. In addition, this smallest / front part of the lense is now slanted versus squared as far as taking a picture. I think when we pulled it out to make it flush, we also turned it a little bit and now it won't turn back either? Help?
my canon PS SD850 IS turns on and off by itself, constantly (until the battery wears out, which...
(More)
my canon PS SD850 IS turns on and off by itself, constantly (until the battery wears out, which happens pretty quickly)