Fortec Star Lifetime ULTRA Support

LNB went bad replaced and unit worked for the

Fri, 18 Dec 2009 22:34:45 GMT

LNB went bad replaced and unit worked for the people for four days and LNB appeared to of went bad again. This time i measured the voltage to it and it was 33 volts instead of the recommended 13-18volts.

Fortec Star Lifetime ULTRA Problem

Fri, 18 Dec 2009 22:34:45 GMT

I have had this satellite receiver working since 10/2/06. It has been working ok until recently. It has a problem that causes the picture and sound to be ok and then seems to have no signal. This on/off action occurs in about a 2 second sequence for...

scramble

Fri, 18 Dec 2009 22:34:45 GMT

some of my channels are scrambled and i dont jnow any of tha codes to use to unblock the only christian network televisions are not scrambled plis help me with tah codes or how to unblock these channels.

fortec star lifetime ultra-no signal appears on most channels

Fri, 18 Dec 2009 22:34:45 GMT

i have a problem with my fortec star lifetime ultra receiver. I am not very good at all this stuff so please explain in detail. It was working fine until two days ago. Now only a couple of channels work and the rest of them have "no signal" i'll...

hi i want to load the fortec star lifttime ultra software

Fri, 18 Dec 2009 22:34:45 GMT

hi i want to load the fortec star lifttime ultra recever please help me to load the program thanks

Fortec Star Lifetime ULTRA Problem

Fri, 18 Dec 2009 22:34:45 GMT

the receiver was working at evening and next day it would not turn on. (no power). I checked on the rear switch and inside the reciever connection pins and the power seems to be going thru, but it won't turn on.

can someone show me how to connect the rs232-db9 cable to a PC.

Fri, 18 Dec 2009 22:34:45 GMT

i can't see a place for that connection in my PC.

meed factory files for fortec star

Fri, 18 Dec 2009 22:34:45 GMT

meed factory files for fortec star i want to return tofactory condition

MY BOX STOPED WORKING

Fri, 18 Dec 2009 22:34:45 GMT

MY DISPLAY KEEPS FLASHING P U F F FROM LEFT TO RIGHT

Hi, I need to watch scrammbled channel with my Digital Receiver

Fri, 18 Dec 2009 22:34:45 GMT

Fortecstar FS-4200 I believe I need a pin number or some sort of upgrade to make this possible. I am connected to a sky disc

Fortec Star HD Passion + Receiver, reset problems + 7 day guide

Fri, 18 Dec 2009 22:34:45 GMT

Hi, my receiver keeps rebooting, The flash file loader_v150 is also installed. According to other web forums this has problems, anbody know how to go back or get v140? Fortec Star sent me a new software file, not on their website: 1.08...

I n eed people in

Fri, 18 Dec 2009 22:34:45 GMT

I n eed people in spanish sorry my english is not good

get the files or bins

Fri, 18 Dec 2009 22:34:45 GMT

Where can i get the files or bins to upgrade my fortec?

action hbs not getting IP

Fri, 18 Dec 2009 22:34:45 GMT

the action hbs is working fine with the fortec receiver at the shop.. but when i try the same connection.. action hbs wudnt connect to the internet. it is just showing 255.255.255.255 as the ip address.. subnet mask, gateway.. whatever amount of...

i forgot my password

Fri, 18 Dec 2009 22:34:45 GMT

i forgot my password to get into the main menu

Up grading Fortec Star (Lifetime II) reciever.

Fri, 18 Dec 2009 22:34:45 GMT

my fortec star reciever is not up grading through (Action HBS link box) to open Showtime program.

Forect Star Passion HD v1.5 (formerly 1.4)

Fri, 18 Dec 2009 22:34:45 GMT

Iortecstar passion HD I have just uploaded v1.5 and new firmware. Prior to this the previous version 1.4 worked fine (wish I'd not fiddles.!) Version v1.5 has loaded but although it shows in the window (as good) the system won't proceed to load onto...

screwed up

Fri, 18 Dec 2009 22:34:45 GMT

viewsat ultra front led svreen reads 8888 remote doesnt work. cant get anything on tv screen, no menu, nothing, please help!!!!!!!!

need update file

Fri, 18 Dec 2009 22:34:45 GMT

need info on file to run fta 110 and 119 could you direct me to site to locate file and loader?

Describe your Fortec Star Lifetime II

Fri, 18 Dec 2009 22:34:45 GMT

PLZ PLZ I HAVE THIS RECIEVER AND I WANT TO UPDATE IT AND I DONT KNOW HOW< SHALL I ATTACH THE HBS box or the reciever itself??where i can find the software, plz plz help me here

Fortec Star upgrade

Fri, 18 Dec 2009 22:34:45 GMT

Good day Jaime, Please could you tell me if, and where i could get a program to upgrade my Fortec Star Life time Ultra to receive channels that are kryptoworks encoded and also if i can upgrade the decoder to autoroll? thanks and regards Keith

USB Memory stick

Fri, 18 Dec 2009 22:34:45 GMT

My usb memory stick had very important documents on it, however it is not being read by my computer. I have tried to insert it into 3 different computers and I have the same problem. Can it be currupt? How can I retrieve the files?

Fortec Innovative problem

Fri, 18 Dec 2009 22:34:45 GMT

Like others I can no longer dowload updates direct from my router - I get the message 'Network established but disconnected (98)'. I have checked Gateway and DNS are the same, have it on DHCP, in 'IP Mode' and 'Local IP', but still I can't get the...

Fortec Innovative

Fri, 18 Dec 2009 22:34:45 GMT

I am in the UK and my router is BT Voyager 2100 and my Fortec Innovative was last updated on the 26 March 2008. I connect my router directly to the Fortec, giving me a permanent connection - as new channel codes are posted on the net my direct...

dish

Fri, 18 Dec 2009 22:34:45 GMT

help

dish

Fri, 18 Dec 2009 22:34:45 GMT

can you help me with my dish elevation?

GULF- FORTEC 5600 II NOT WORKING

Fri, 18 Dec 2009 22:34:45 GMT

Sir, Every one in gulf is facing problem with fortec 5600 II net work not connected check lan and router we were able to successfully download 15.08.08 software but still it is not working plz suggest

need to get up and

Fri, 18 Dec 2009 22:34:45 GMT

fortec

wont turn on.

Fri, 18 Dec 2009 22:34:45 GMT

Was given this receiver to piddle around with but nothing I have tried has worked. Could it possibly be a virus or do you believe it is just kaput?

Please get me started with Fortec Star Lifetime ULTRA

Fri, 18 Dec 2009 22:34:45 GMT

Hi, I have a Fortec Star Lifetime ULTRA that I haven't used for about a year (it was working then, but not now off course). I would like to know the steps to follow to get it up and running. I'm new to sat receivers, and when I hear things like...