20 Most Recent Whirlpool Cabrio WTW6600SBK - Page 4 Questions & Answers


Raise the top cover and look on the inside of the front panel, it should be taped on there/

Whirlpool Cabrio... | Answered on Sep 05, 2016


If all you want to do is to replace the lid, there are two TORX 15 screws on each side. Undo those and the lid should slide right off the pins. Be careful to not drop them into the tub or dispensers. You can then slide the new lid right on. Put the screws back on and test. If you lift the top cover off and mess with the springs, it is a PAIN to take off and put back on.

Whirlpool Cabrio... | Answered on Apr 24, 2016


check inter lock or lid lock

Whirlpool Cabrio... | Answered on Mar 09, 2015


Good Day,
Your washing machine is fully automatic?
the washing cycle is normal?
if yes do the same maybe it will help you.
for the fully automatic washing machine mostly have drain pump, please check the filter of your drain pump, how? remove the cup of your drain pump like a ordinary cup, screw it clock wise or counter clock wise.
Remove drain pump filter and clean it, some hair pins, cotton buds or coins or any small item that coz of clog up.
if your washing machine dont have drain pump ,but fully automatic check the drain motor if running or not? how? open the back cover for top loader washing machine only, select spin cycle and press start to see the drain motor running? the drain motor is like a small box with small wire to pull the lever of the drain to remove water inside, if the motor running or pull the lever of the water pipe but water still inside the washing machine, remove the drain cup or cover and clean it or check if have coin or cloth inside that coz of clog or water stuck,
if the drain pump or drain motor is weak this is will cause and long time draining or totally not running the drain pump or drain motor and its cause of totally stop the cycle of washing machine in rinse time or spin time, because all fully automatic washing machine, after washing cycle the drain pump or drain motor must be on, to remove water before start the next cycle. rinse or spin cycle.

Whirlpool Cabrio... | Answered on Jan 28, 2015


F50 could be One of many, first check to see if there is any obstruction as in clothing. The basket should turn freely. The console has detect a failure in the RPS , or a wire harness is loose
if too much water enters the tub that can also cause excessive friction.

Whirlpool Cabrio... | Answered on May 02, 2014


That code is for a main control failure, only repair is to replace main pcb.

Whirlpool Cabrio... | Answered on Apr 06, 2014

Not finding what you are looking for?
Whirlpool Cabrio WTW6600SBK Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cabrio Whirlpool

  • Cabrio Whirlpool

Most Popular Question

whirlpool cabrio error code f51 mean

  • Washing Machines
Loading...