http://www.fixya.com/support/p52123-amana_alw880wh_top_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 09 Dec 2009 22:01:44 GMT80http://www.fixya.com/support/t3541344-washer_alw880qaw_agitates_but_not_spinMy washer (ALW880QAW) agitates but does not spin. I took off the front cover and the found a black circular piece lying there (What it goes to I do not know). The belt looks okay. The motor goes in spin cycle but the belt does not move.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t3464955-seems_like_no_pressure_coming_out_coldSeems like there is no pressure coming out of cold water tapWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t3220297-top_load_ge_machine_not_spin_fillsmy top load ge machine does not spin. it fills with water and makes a humming sound like it is trying to spin. how can i get it to workWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2687863-washer_fills_agitates_stopswasher fills and agitates then stopsWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2680366-kenmore_elite_washer_will_not_stopThe washer will not stop fill with water over flowsWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2450202-maytag_amana_top_load_washer_motor_hummsmodel is ALW880QAW, built by Maytag with parts now from Whirlpool. Motor humms but motor fails to start without my physically turning the drive belt. Motor and capacitor both feel warm soon after the motor starts. Wondering if it's a bad motor, bad...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t356976-water_will_not_stop_filling_washerThe water will continue to fill the washer and the cycle does not start Please help!Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2384640-amana_alw780qaw_mold_in_agitatorMy top load Amana (stainless tub) gets black gunk build up under the cap on the agitator where you pour the fabric softener. I am able to clean it with a screwdriver with a cloth wrapped around it then run a super capacity setting with lots of...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2308431-amana_2002_top_loader_washer_modelIt starts leaking and getting worst everyday. It leaks more when spinning than agitating. I'd like to know what was wrong and how to fix it. Thanks a million. --Matthew the washer starting leaking when the machine is spinning out. It was a small...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2323438-washer_fill_cold_waterThe washer won't fill with cold water. Disconnected the hose from the washer and turned on the cold water, no water. How do I replace the valve in the wall?Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t2273631-amana_clothes_washer_alw880qawwill not agitate, spin, or drain. It will fill up with water and you can hear the machine humming. There is no odor and the macine worked last time it was used.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t133290-washing_machine_no_cold_waterMy washing machine wont fill up on cold water only the hot water works.I have check the valves and they are on correctly.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t1768155-amana_alw880qac_leaking_bottom_tubThe washer suddenly started leaking . I inspected, and can see water seeping out the bottom of the tub where the drive hub attaches. It seeps out and down the stem onto the place where the stem widens out. The water sits there until the spin cycle,...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t1745088-tube_barringhow to get the tub bearing off of washer?Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t1652753-washer_no_longer_going_rinse_cylewasher is no longer going through the rinse cyle (dispensing fabric softener) or wringing out clothes.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t281141-washer_stopped_after_filling_small_loadI put in a small load, and turned washer on. After it filled up, it just stopped. It never made any noise or anything. I have checked the breakers and changed to another outlet, but nothing. It is not off balance either. I have messed with the knobbs...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t283365-amana_washer_no_hot_water_cold_worksno hot or warm only coldWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t235541-amana_2002_top_loader_washer_modelfills with water, clicks and advances to wash cycle, loud buzzing noise continues for about 1 or 2 minutes then the machine turns off. I unpluged it and bypassing the wash cycle and movied to the spin cylce nothing happens no buzzinbg noise just...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t647042-water_leaking_around_machineRemoved front panel, lifted top panel with lid closed, When machine drains and spins, water climbs up the side of the tub and spills over the top. I comes out the back holes of the tub enclosure. The timing cycle - wash stops - pause for a few...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t622555-washing_machine_not_workingI think I overloaded my washer and started it. I went upstairs and could smell something burning. The washing machine is full of water but will not work.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t497824-water_drains_out_as_fast_as_fillingMy Amana washer is filling with water, then the water is just draining out.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t408857-amana_washer_leakingWhen the Amana Commercial Quality washer is running it creates a puddle of water on the floor in front of the machine. There is no noticeable water behind or beside the machine. My husband took the front panel off and there is a little water at the...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t347726-washer_wont_agitate_med_large_loadsMy washer has gradually stopped agitating havier loads. I am now down to the smallest load it will wash. All the other cycles seem to work fine, it just wont agitate after filling. Any help would be appreciated. ThanksWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t134752-amana_washer_will_leaks_water_in_tubAMANA WASHER LEAKS WATER INTO THE TUB AFTER THE SPIN CYCLE. THIS MAKES THE CLOTHS DAMP IF NOT REMOVE IMMEDITATELY FROM THE TUB. THE PROBLEM DOES NOT OCCUR EVERY TIME THE WASHER IS USED.Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t102488-amana_washing_machinegetting oil in the tub and on clothesWed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t196869-maytag_stops_any_cycle_after_warmHi, The washer stop in the middle of cycles after a while (usually in the second wash). Even if the cycle is changed it doesn't do anything. After couple of days and after the machine is disconnected you can use it again and it works fine but only...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t198529-replacing_fins_duet_whirlpool_washerI am trying to replace the plastic fins inside the drum of my whirlpool duet washer. I have the parts, and it is officially clled the drum baffle kit. I have a picture of how to install it, but how do I get to the drum? From the picture it looks...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t198784-kenmore_top_loading_washing_machineabout every 5th load of laundry the spin cycle, prior to finishing, will not go into spin. The machine rinses and then just sits there as if it is waiting on a signal to begin spinning. Once the time period for the spin cycle completes the washer...Wed, 09 Dec 2009 22:01:44 GMThttp://www.fixya.com/support/t199234-maytag_frontload_washer_door_leakinghi...i have a maytag frontload washer and there is a lot of water and suds leaking out the bottom and sides of the door. it is a circular clear door. inside there is gray stretchy lining around the door and this wire circle with a spring at the top...Wed, 09 Dec 2009 22:01:44 GMT